Page 116 / 156
Scroll up to view Page 111 - 115
Advance
Port Mapping
9-22
Alcatel-Lucent
3FE-61830-AAAA-TCZZA
Edition 01
May 2008
Port Mapping
Click
Port Mapping
10
in the Advance menu to open the Port Mapping window. In this
window you can bind the WAN interface and the LAN interface to the same group.
To configure a mapping group:
1
Select a group from the table.
2
Select an interface from the WAN Interface list and add it to the Grouped Interface list by
clicking
Add >
.
3
Select an interface from the LAN Interface list and add it to the Grouped Interface list by
clicking
Add >
.
4
Click
Apply Changes
button to save your configurations.
10
4-port and 4-port wireless models only.
Page 118 / 156
Advance
Other
9-24
Alcatel-Lucent
3FE-61830-AAAA-TCZZA
Edition 01
May 2008
The following table describes the fields of the Port Mapping window.
Table 9-10
Field descriptions
Field
Description
Disable/Enable
When you enable the port mapping
function you can configure the port
mapping parameters.
WAN Interface
All of the available WAN interfaces.
LAN Interface
All of the available LAN interfaces.
Add
Select a WAN interface and a LAN
interface and then click to bind them. The
bound interfaces appear in the grouped
interfaces list.
Delete
Select the grouped interface and then click
to delete it.
Priority
Specify the priority of the port binding
rules which have been listed in the four
groups.
Apply Changes
Click to save your changes.
Other
Click
Other
in the Advance menu to open the Other menu in the left-hand panel, which
contains:
•
IGMP Proxy
•
UPNP
•
Bridge
•
IP PassThrough
Page 119 / 156
Other
Advance
3FE-61830-AAAA-TCZZA
Alcatel-Lucent
9-25
Edition 01
May 2008
IGMP Proxy
Click
IGMP Proxy
in the left-hand panel to open the IGMP Proxy Configuration window.
IGMP proxy enables the CellPipe 7130 RG to issue IGMP host messages on behalf of
hosts that the CellPipe 7130 RG discovered through standard IGMP interfaces. The
CellPipe 7130 RG acts as a proxy for its hosts after you enable IGMP.
Figure 9-13
IGMP Proxy Configuration window
The following table describes the fields of the IGMP Proxy Configuration window.
Table 9-10
Field descriptions
Field
Description
IGMP Interface
Click to have the CellPipe 7130 RG
function as an IGMP proxy.
Proxy Interface
Indicate the upstream or downstream
interface that connects to an IGMP-
enabled device.
Apply Changes
Click to save your changes.
Page 120 / 156
Advance
Other
9-26
Alcatel-Lucent
3FE-61830-AAAA-TCZZA
Edition 01
May 2008
UPNP
Click
UPNP
in the left-hand panel to open the UPnP Configuration window. The system
acts as a UPnP daemon after you enable UPnP.
Figure 9-14
UPnP Configuration window
The following table describes the fields of the UPnP Configuration window.
Table 9-11
Field descriptions
Field
Description
UPnP
Click to have the CellPipe 7130 RG
function as a UPnP daemon.
WAN Interface
Select an upstream WAN interface that
will use UPnP.
Apply Changes
Click to save your changes.
Bridge
Click
Bridge
in the left-hand panel to open the Bridge Configuration window. This
window enables you to configure bridge settings and view information about the bridge
and its attached ports.
19216811.live