Page 56 / 156
Scroll up to view Page 51 - 55
Wizard
To use the configuration wizard
5-16
Alcatel-Lucent
3FE-61830-AAAA-TCZZA
Edition 01
May 2008
Table 5-6
Field descriptions
12
Click
Next
. The WAN Setup - Summary window appears.
Field
Description
LAN IP
The IP address of the CellPipe 7130 RG in
dotted decimal notation; for example,
192.168.1.1(factory default).
Subnet Mask
The subnet mask of the LAN IP address; for
example 255.255.255.0.
Enable Secondary IP
Select this check box to enable the secondary
LAN IP address.
Enable DHCP Server
Select this check box to enable the DHCP
server. The DHCP server assign IP addresses
on request to devices connected to the LAN.
Start IP
The first of the contiguous addresses in the IP
address pool.
End IP
The last of the contiguous addresses in the IP
address pool.
Max Lease Time
The maximum time period for which a
connected computer will maintain a LAN IP
address assigned by DHCP.
Page 57 / 156
To use the configuration wizard
Wizard
3FE-61830-AAAA-TCZZA
Alcatel-Lucent
5-17
Edition 01
May 2008
Figure 5-11
WAN Setup ° Summary window
13
Click
Finish
to save these settings or
Back
to make changes. You have finished using the
configuration wizard.
E
N D
O
F
S
T E P S
Page 59 / 156
3FE-61830-AAAA-TCZZA
Alcatel-Lucent
6-1
Edition 01
May 2008
6
LAN
Overview
Purpose
The LAN configuration windows are used to define the IP address of the CellPipe 7130
RG and to configure the DHCP server.
Select
LAN
in the CellPipe 7130 RG menu bar to
open the LAN menu, which contains
LAN Settings
and
DHCP Settings
.
This menu is
available only for the admin user.
Contents
This chapter covers the following topics:
LAN Settings
6-1
DHCP Settings
6-3
LAN Settings
On the LAN Interface Setup window you can configure the LAN IP address of the
CellPipe 7130 RG. The default IP address is
192.168.1.1 and is acceptable for most
network environments. This is the address at which the CellPipe 7130 RG can be reached
in the local network. This address can be freely assigned from the block of available
private addresses.
Page 60 / 156
LAN
LAN Settings
6-2
Alcatel-Lucent
3FE-61830-AAAA-TCZZA
Edition 01
May 2008
Select
LAN Settings
in the LAN menu to open the LAN Interface Setup window.
Figure 6-1
LAN Interface Setup window (4-port wireless model shown)
The following table describes the fields of the LAN Interface Setup window.
Table 6-1
Field descriptions
Field
Description
Interface Name
The preset name of the LAN interface you
are configuring.
IP Address
The IP address of the LAN interface in dotted
You can change this address as needed to an
address that is reserved for private use. The
192.168.255.254.
Subnet Mask
The subnet mask of the IP addresses in your
LAN; for example, 255.255.255.0.
Secondary IP
Select the check box to enable the secondary
LAN IP address. The primary and secondary
LAN IP addresses must be different.
19216811.live