1. Home
    2. /
  2. Manuals
    3. /
  3. Alcatel-Lucent
    4. /
  4. Cellpipe-7130
    5. /
  5. 11
Page 51 / 156 Scroll up to view Page 46 - 50
To use the configuration wizard
Wizard
3FE-61830-AAAA-TCZZA
Alcatel-Lucent
5-11
Edition 01
May 2008
Figure 5-8
WAN IP Settings window
The following table describes the fields of the WAN IP Settings window.
Table 5-4
Field descriptions
Field
Description
Obtain an IP address automatically
Instructs the CellPipe 7130 RG to obtain a
WAN IP address automatically and enable
DHCP client functions.
Use the following IP address
When selected, this option instructs the
CellPipe 7130 RG to use the WAN IP address
provided in the WAN IP Address field.
WAN IP Address
The static IP address of the WAN interface
(provided by your ISP) in dotted decimal
notation.
WAN Subnet Mask
The subnet mask for the IP address of the
WAN interface provided by your ISP; for
example, 255.255.255.0.
Page 52 / 156
Wizard
To use the configuration wizard
5-12
Alcatel-Lucent
3FE-61830-AAAA-TCZZA
Edition 01
May 2008
Field
Description
Default Gateway
The IP address of the default gateway to
access the Internet.
Obtain DNS server addresses automatically
When selected, this option instructs the
CellPipe 7130 RG to obtain the IP address of
the DNS assigned by the uplink equipment
such as BAS.
Use the following DNS server addresses
When selected, this option instructs the
CellPipe 7130 RG to use the IP address of the
DNS specified in the Primary DNS server and
Secondary DNS server fields.
Primary DNS server
The IP address of the primary DNS provided
by your ISP, in dotted decimal notation.
Secondary DNS server
The IP address of the secondary DNS
provided by your ISP, in dotted decimal
notation.
Enable NAT
Select the check box to enable the NAT
functions of the CellPipe 7130 RG. NAT must
be enabled if the CellPipe 7130 RG is
functioning as a router.
9
Click
Next
. The WAN Setup Summary window appears. This window lists the WAN
configuration settings specified in steps 2, 3, and 8. Click
Finish
to save these settings, or
Back
to make changes. You have finished using the configuration wizard.
1483 Routed configuration
10
If you selected
1483 Routed
as the WAN Connection Type in step 3, the WAN IP
Settings window appears.
Page 53 / 156
To use the configuration wizard
Wizard
3FE-61830-AAAA-TCZZA
Alcatel-Lucent
5-13
Edition 01
May 2008
Figure 5-9
WAN IP Settings window
The following table describes the fields of the WAN IP Settings window.
Table 5-5
Field descriptions
Field
Description
None
Select
None
to use the IP Unnumbered
function in 1483 Routed mode, which enables
IP processing on an interface without
assigning it an explicit IP.
Obtain an IP address automatically
Instructs the CellPipe 7130 RG to obtain a
WAN IP address automatically each time you
connect to the network.
Use the following IP address
When selected, this option instructs the
CellPipe 7130 RG to use the WAN IP address
provided in the WAN IP Address field.
Page 54 / 156
Wizard
To use the configuration wizard
5-14
Alcatel-Lucent
3FE-61830-AAAA-TCZZA
Edition 01
May 2008
Field
Description
WAN IP Address
The static IP address of the WAN interface
(provided by your ISP) in dotted decimal
notation.
WAN Subnet Mask
The subnet mask for the IP address of the
WAN interface provided by your ISP; for
example, 255.255.255.0.
Obtain DNS server addresses automatically
When selected, this option instructs the
CellPipe 7130 RG to obtain the IP address of
the DNS assigned by the uplink equipment,
such as BAS.
Use the following DNS server addresses
When selected, this option instructs the
CellPipe 7130 RG to use the IP address of the
DNS specified in the Primary DNS server and
Secondary DNS server fields.
Primary DNS server
The IP address of the primary DNS provided
by your ISP, in dotted decimal notation.
Secondary DNS server
The IP address of the secondary DNS
provided by your ISP, in dotted decimal
notation.
Enable NAT
Select the check box to enable the NAT
functions of the CellPipe 7130 RG. NAT must
be enabled if the CellPipe 7130 RG is
functioning as a router.
1483 Bridged configuration
11
The LAN Interface Setup window appears.
Page 55 / 156
To use the configuration wizard
Wizard
3FE-61830-AAAA-TCZZA
Alcatel-Lucent
5-15
Edition 01
May 2008
Figure 5-10
LAN Interface Setup window
The following table describes the fields of the LAN Interface Setup window.

Rate

4.8 / 5 based on 5 votes.

Popular Alcatel-Lucent Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top