1. Home
    2. /
  2. Manuals
    3. /
  3. AirTies
    4. /
  4. Air5452FT
    5. /
  5. 2
Page 6 / 29 Scroll up to view Page 1 - 5
1.2
Minimum System Requirements
•
ADSL service on your phone line must be active and working properly,
•
For wired use: a computer with an Ethernet adaptor that supports the TCP/IP
•
For wireless use: 802.11b or 802.11g wireless adapter or computer with wireless capabilities.
•
Any version of Windows or Unix, Linux, Mac operating systems
•
For the AirTies Utility Program: Windows 98 / ME / 2000/ 2003 or XP operating systems
1.3
Package Contents
Please ensure that the package contains all of the items listed below. Contact your dealer
immediately if any of the following items are missing or damaged.
1.
AirTies RT-205 125Mbps Wireless ADSL2+
1 Port Modem
2.
Power adapter and power cord
3.
Ethernet cable
4.
Standard telephone/ADSL cable (1 long and 1 short)
5.
Telephone/ADSL line splitter
6.
AirTies Easy Setup CD
7.
User Manual (this document)
8.
Warranty Card (3 years)
4
AirTies RT-205 User Manual Rev.0.1
6
8
Page 7 / 29
1.5
Back Panel
Interfaces for data and power (ports) are located on the back of the AirTies RT-205
.
1.4
Front Panel
The LEDs on the front panel show modem status. When the modem is configured and functioning
properly, all LED indicators are green. The following table shows the states indicated by the LEDs.
PWR
ADSL
PPP
WLAN
LAN
Green
Off
Green
Flashing Green
Off
Green
Off
Green
Flashing Green
Off
Green
Flashing Green
OffA
RT-205 is powered ON.
RT-205 is powered OFF.
ADSL connection is established.
AirTies RT-205 is negotiating an ADSL connection.
No ADSL connection.
Internet connection is established.
No Internet connection.
A wireless connection is established
A wireless connection is established and data transfer is occurring.
No wireless connection
Local Area Network (LAN) connection is established.
Local Area Network (LAN) connection is established and data
transfer is
occurring.
No Local Area Network (LAN) connection.
LED
Light
Status
1
2
3
4
5
ADSL
PWR
Reset
1/0
LAN
ADSL line port.
To be connected to the MODEM port of the splitter.
12 Volt DC port. To be connected to the supplied AC/DC adapter.
To reset the custom configuration of your modem and return to factory
settings.
Power switch to turn the device ON or OFF.
Ethernet port (10/100). To be connected to the Ethernet Port of the PC.
Number
Port
Description
5
AirTies RT-205 User Manual Rev.0.1
125 Mbps Wireless
ADSL2+ 1 Port Router
PWR
ADSL
PPP
WLAN
LAN
PWR
12V/1A
ADSL
Reset
LAN
Page 8 / 29
2.
Safety and Maintenance
When operating the AirTies RT-205, please follow these safety guidelines:
• In order to prevent damage to your device, be sure to keep it in its original box during transportation.
• The device must be used solely with its original power adapter. Please note that the adapter
is 220V only. Do not use with 110V AC.
• Do not insert a PSTN (phone) plug into the LAN port.
• If you encounter any problems, do not open or disassamble the device. Instead, call AirTies
Technical Support.
• In order to prevent electric shock, do not operate the device in wet or damp areas.
• In the event of a gas leak, do not use the device. Do not turn the device on or off. Do not plug
or unplug the power cord.
• Avoid using the device in dusty environments. If dust buildup should occur, use a dry cloth to
remove the dust.
• To clean the exterior of the device use a dry cloth. Do not attempt to clean the interior. There
are no user serviceable components inside.
• For further information regarding the installation and configuration of the device consult the
remainder of this manual.
• In order to ensure the best care for your device, retain this manual as a guide for future reference.
3.
Installation
3.1
Connecting the Cables
This chapter describes how to set up and configure your RT-205.
How to connect the cables is also explained in detail by the animated instructions that automatically
start when you insert the Easy Setup CD into the CD drive of your PC.
1. Connect your ADSL telephone plug to the
“LINE”
port of the splitter
2. Connect the
“PHONE”
port of the splitter with your regular telephone device.
3. Using the short telephone/ADSL cable provided, connect the
“MODEM”
port of the splitter with
the
“ADSL”
port of your RT-205 modem.
4. You can connect your PC to the Ethernet port of the AirTies RT-205. Alternatively, you can
connect your PC wirelessly to the local wireless network set up by the AirTies RT-205.
5. Plug the power adapter provided into the 220V wall outlet and the other end of the power cord
to the RT-205 modem.
Make sure all cabling is done properly before turning the power on.
Turn your modem on.
6
AirTies RT-205 User Manual Rev.0.1
PHONE
MODEM
LINE
Page 9 / 29
3.2
Installation Settings
Completing the hardware connections in the previous section is necessary before modifying the
installation settings. After the hardware setup is complete, turn the RT-205 on
and wait about
30 seconds for the modem to initialize.
You can modify the installation settings in one of two ways:
1. By using the Easy Setup CD with animated instructions, or,
2. By using the Web User Interface
Both methods are described in the following sections.
*
It is recommended that you use the AirTies Easy Installation CD for the initial installation.
3.2.1
Installation Settings Using the Easy Setup CD
The AirTies ADSL Utility Software provides you with the easiest way to complete the installation
of your modem and activation of its ADSL access.
Once the cabling is completed, insert the Easy Setup CD into the CD drive of your PC. The
AirTies
ADSL Utility Software Installation program will start automatically. If it does not start automatically,
please run the program
“installation.exe”
on the CD.
1. Click on the RT-205 picture. A sequence of animated instructions will guide you through the
cabling of your RT-205 modem. Please verify that you have connected the cables as shown in this
presentation.
You can skip this animation at any time and proceed with setup by clicking the
Setup
link in the
upper right hand corner of the window.
7
AirTies RT-205 User Manual Rev.0.1
Page 10 / 29
2. Once the presentation is finished, click the“
SETUP
” button. This will launch the
Airties ADSL
Utility Setup Wizard.
3. Click “
Next>
” to proceed with setup.
8
AirTies RT-205 User Manual Rev.0.1

Rate

4.5 / 5 based on 2 votes.

Popular AirTies Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top