1. Home
    2. /
  2. Manuals
    3. /
  3. AirLive
    4. /
  4. WT-2000ARM
    5. /
  5. 3
Page 11 / 81 Scroll up to view Page 6 - 10
7
3. Setup Wizard
This router provides a Setup Wizard tool for user to configure the ADSL settings.
This wizard collects some ISP’s ADSL settings so that user can easy to configure
the router’s ADSL settings by only selecting the ISP vendor from the wizard.
If you cannot find your ISP from the wizard, please refer to the Section 5.1 to run
the Quick Start wizard in the web management of the router.
Before you start, please check the following items:
1. Please make sure that you have connected the ADSL cable to the router
correctly. When the ADSL cable is worked normally, the ADSL LED will be on.
2. Uninstall all of dial up programs if you have installed previously for the USB
modem or other dial up devices.
3. It is recommended to configure the router through the Ethernet cable before
you have set the wireless functions correctly.
This wizard can be run in Windows 98SE/Me/2000/XP. The following procedures
are operated in Windows XP. (Procedures are similar for Windows
98SE/Me/2000.)
1. Insert the CD shipped along with the ADSL router into your CD-ROM drive.
The Autorun.exe program should be executed automatically. If not, run
Autorun.exe manually from “Autorun” folder in the CD.
Page 12 / 81
8
2. The following screen will be displayed. Click “Setup Wizard”.
3. This wizard will be executed and try to search for the ADSL Router.
Page 13 / 81
9
4. If the router cannot be found, please enter the IP Address and the Password
of the router to search again. Click “Next” to continue.
5. Please select the country you have installed the ADSL router and click “Next”.
Page 14 / 81
10
6. Please select the ISP (Internet Service Provider) of your ADSL service.
7. Enter the Username and Password which your ISP has provided to you if it is
needed. Click “Next”.
Page 15 / 81
11
8. Click “Save” to save the settings and reboot the router.
9. After saving and rebooting the router, the ISP settings are all finished. This
wizard will then help to set your computer to obtain IP Address from the router
automatically.
Note1: Using the router to get into the Internet, the IP Address of each
PC has to be set in the same subnet as the router. This wizard will help
to set the proper IP Address to your computer.
Note2: By default, the router’s DHCP Server is enabled. If it is disabled
before running the wizard, the wizard will enable the DHCP Server of the
router automatically.

Rate

4 / 5 based on 1 vote.

Popular AirLive Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top