AirLive WT-2000ARM Router Manual PDF (Setup & Configuration Guide)
Given below is full router user manual of AirLive WT-2000ARM router model. You can also download this manual in PDF Format to read later on your computer.
Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.
Page 1 / 81
AirLive WT-2000ARM
ADSL2/2+ Router
1
WT-2000 ARM
Wireless ADSL 2/2+ Modem Router
User’s Guide
Page 2 / 81
AirLive WT-2000ARM
ADSL2/2+ Router
2
Copyright
The contents of this publication may not be reproduced in any part or as a whole, stored, transcribed in an
information retrieval system, translated into any language, or transmitted in any form or by any means,
mechanical, magnetic, electronic, optical, photocopying, manual, or otherwise, without the prior written
permission.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against radio interference in a
residential environment.
AirLive
WT-2000 ARM
can generate, use and radiate radio frequency energy and, if
not installed and used in accordance with the instructions in this manual, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
AirLive
WT-2000
ARM
does cause harmful interference to radio or television reception, which is found by turning the equipment
ON and OFF, the user is encouraged to try to reduce the interference by one or more of the following measures:
y
Adjust or relocate the receiving antenna
y
Increase the separation between the equipment or device
y
Consult a dealer or an experienced technician for assistance
CE Declaration of Conformity
This is to certify that this device complies the essential protection requirements of the European Council
Directive 89/336/EEC, Article 4a. Conformity is declared by the application of EN 55 022 Class B (CISPR 22).
Compliance with the applicable regulations is dependent upon the use of shielded cables. It is the responsibility