1. Home
    2. /
  2. Manuals
    3. /
  3. Adtran
    4. /
  4. NetVanta 2100
    5. /
  5. 4
Page 16 / 210 Scroll up to view Page 11 - 15
Section 2, Engineering Guidelines
NetVanta 2000 Series System Manual
16
© 2002 ADTRAN, Inc.
61200361L1-1E
1.
EQUIPMENT DIMENSIONS
NetVanta 2050 and 2100
The NetVanta 2050 and 2100 units are 9.0” W, 6.375” D, and 1.625” H and come equipped for table top
and wallmount use. An optional rackmount shelf is available from ADTRAN.
NetVanta 2300 and 2400
The NetVanta 2300 units are17.25" W, 7.75" D, and 1.26" H and come equipped for rackmount use.
2.
POWER REQUIREMENTS
NetVanta 2050 and 2100
The NetVanta 2000 series has a maximum power consumption of 9W and a maximum current draw of
800mA.
NetVanta 2300 and 2400
The NetVanta 2300 has a maximum power consumption of 11W and a maximum current draw of 0.2A.
3.
REVIEWING THE FRONT PANEL DESIGN
NetVanta 2050
The NetVanta 2100 front panel monitors operation by providing status LEDs for both the LAN and WAN
interfaces, as well as VPN tunnels and traffic. The front panel is shown in
Figure 1
.
Figure 1.
NetVanta 2050 Front Panel Layout
PWR
STAT
TD
VPN
RD
TD
RD
TD
RD
NetVanta 2050
WAN
LAN
PWR
STAT
TD
VPN
RD
TD
RD
NetVanta 2050
WAN
LAN
Page 17 / 210
NetVanta 2000 Series System Manual
Section 2, Engineering Guidelines
61200361L1-1E
© 2002 ADTRAN, Inc.
17
NetVanta 2100
The NetVanta 2100 front panel monitors operation by providing status LEDs for both the LAN and WAN
interfaces, as well as VPN tunnels and traffic. The front panel is shown in
Figure 2
.
Figure 2.
NetVanta 2100 Front Panel Layout
NetVanta 2300
The NetVanta 2300 front panel monitors operation by providing status LEDs for the LAN, WAN, and
DMZ interfaces, as well as VPN tunnels and traffic. The front panel is shown in
Figure 3
.
Figure 3.
NetVanta 2300 Front Panel Layout
NetVanta 2400
The NetVanta 2300 front panel monitors operation by providing status LEDs for the LAN, WAN, and
DMZ interfaces, as well as VPN tunnels and traffic. Additionally, a LCD display provides quick-glance
access to the LAN IP parameters (IP address and subnet mask). The front panel is shown in
Figure 4
.
Figure 4.
NetVanta 2400 Front Panel Layout
PWR
STAT
TD
VPN
RD
TD
RD
TD
RD
NetVanta 2100
WAN
LAN
PWR
STAT
TD
VPN
RD
TD
RD
WAN
LAN
STATUS
POWER
VPN
TD
RD
ACT
TD
RD
LNK
TD
RD
LNK
TD
RD
LNK
WAN
LAN
DMZ
NetVanta 2300
2300
STATUS
ENTER
CANCEL
POWER
NetVanta 2400
VPN
TD
RD
ACT
TD
RD
LNK
TD
RD
LNK
TD
RD
LNK
WAN
LAN
DMZ
Page 18 / 210
Section 2, Engineering Guidelines
NetVanta 2000 Series System Manual
18
© 2002 ADTRAN, Inc.
61200361L1-1E
Front Panel LEDs
With the NetVanta 2000 series powered-up, the front panel LEDs provide visual information about the
status of the system. Table 1 provides a brief description of the front panel features, and Table 2 provides
detailed information about the LEDs.
Table 1.
NetVanta 2000 series Front Panel Description
Feature
Description
PWR
Indicates whether the unit has power.
VPN (2050/2100 only)
Indicates status of VPN negotiations.
VPN TD
Indicates VPN traffic transmitted by the NetVanta.
VPN RD
Indicates VPN traffic received by the NetVanta.
VPN ACT (2300/2400 only)
Indicates status of VPN Negotiations.
LAN TD
Indicates LAN traffic transmitted by the NetVanta.
LAN RD
Indicates LAN traffic received by the NetVanta.
LAN LNK
(2300/2400 Only)
Indicates active physical link on the LAN port.
WAN TD
Indicates WAN traffic transmitted by the NetVanta.
WAN RD
Indicates WAN traffic received by the NetVanta.
WAN LNK (2300/2400 Only)
Indicates active physical link on the WAN port.
Table 2.
NetVanta 2000 series LEDs
For these LEDs...
This color light...
Indicates that...
PWR
Red (solid)
The unit has power and is in the boot process.
Green (solid)
Unit has power and has successfully completed the
boot process.
VPN
(2050/2100 only)
VPN ACT
(2300/2400 Only)
Amber (slow blink)
Initial Phase 1 IKE negotiation in progress.
Green (slow blink)
Initial Phase 1 IKE negotiation completed successfully.
Red (slow blink)
Phase 1 IKE negotiation failed.
Amber (fast blink)
Phase 2 IKE negotiation in progress.
Green (solid)
Phase 2 IKE negotiation completed successfully.
Red (fast blink)
Phase 2 IKE negotiation failed.
Amber and Green
(alternating slow blink)
There is an active tunnel and an additional IKE Phase
1 negotiation in progress.
Page 19 / 210
NetVanta 2000 Series System Manual
Section 2, Engineering Guidelines
61200361L1-1E
© 2002 ADTRAN, Inc.
19
4.
REVIEWING THE REAR PANEL DESIGN
NetVanta 2050 and 2100
The NetVanta 2050 and 2100 rear panel contains 2 Ethernet ports, a DB-9 serial connection, and a power
connection (see
Figure 5
).
Figure 5.
NetVanta 2050 Rear Panel Layout
VPN TD
Green (blink)
Flashes with VPN data transmitted by the NetVanta
2000 series.
VPN RD
Green (blink)
Flashes with VPN data received by the NetVanta 2000
series.
LAN TD
Green (blink)
Flashes with data transmitted on the LAN interface.
LAN RD
Green (blink)
Flashes with data received on the LAN interface.
LAN LNK
(2300/2400 Only)
Green (solid)
Unit has active physical connection on the LAN
interface.
WAN TD
Green (blink)
Flashes with data transmitted on the WAN interface.
WAN RD
Green (blink)
Flashes with data received on the WAN interface.
WAN LNK
(2300/2400 Only)
Green (solid)
Unit has active physical connection on the WAN
interface.
Table 2.
NetVanta 2000 series LEDs (Continued)
For these LEDs...
This color light...
Indicates that...
POWER
WAN
LAN
COM 1
Page 20 / 210
Section 2, Engineering Guidelines
NetVanta 2000 Series System Manual
20
© 2002 ADTRAN, Inc.
61200361L1-1E
NetVanta 2300
The NetVanta 2300 rear panel contains 3 Ethernet ports, a DB-9 serial connection, and a power connection
(see
Figure 6
).
Figure 6.
NetVanta 2300 Rear Panel Layout
NetVanta 2400
The NetVanta 2300 rear panel contains 3 Ethernet ports, a DB-9 serial connection, a power connection and
ventilation openings (see
Figure 7
).
Figure 7.
NetVanta 2400 Rear Panel Layout
LAN Interface
The NetVanta 2000 series provides a standard 10/100BaseT Ethernet interface for connection to the local
corporate network. Connect the LAN interface to a hub located on your local corporate network. A DHCP
Server is enabled on the LAN interface by default. References to the LAN interface include LAN, CORP,
and Eth0
The LAN connection follows, and
Table 3
shows the pinout.
Connector Type
RJ-48C
Table 3.
LAN Pinout
Pin
Name
Description
1
TX1
Transmit Positive
2
TX2
Transmit Negative
3
RX1
Receive Positive
4, 5
UNUSED
—
6
RX2
Receive Negative
7, 8
UNUSED
—
LAN
DMZ
100-250VAC
WAN
SERIAL
DMZ
LAN
WAN

Rate

4 / 5 based on 1 vote.

Popular Adtran Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top