ADB P-RG_A4202N Router Manual PDF (Setup & Configuration Guide)

Page 141 / 182 Scroll up to view Page 136 - 140

PRG AV4202N

134

OGU 930500275-A1

Advanced Section

1.

Click the 'Scheduler Rules' icon in the 'Advanced' screen of the Web-base

Management. The 'Scheduler Rules' screen will appear.

2.

Click the 'New Scheduler Entry' link. The 'Scheduler Rule Edit' screen will

appear

3.

Specify a name for the rule in the 'Name' field.

4.

Specify if the rule will be active/inactive during the designated time period, by

selecting the appropriate 'Rule Activity Settings' check-box.

5.

Click the 'New Time Segment Entry' link to define the time segment to which

the rule will apply. The 'Time Segment Edit' screen will appear.

(a) Select active/inactive days of the week.

(b) Click the 'New Time Segment Entry' to define an active/inactive hourly

range.

6.

Click 'OK' to save the settings.

FIGURE 33.

Scheduler Rules Panel

SIMPLE NETWORK

MANAGEMENT PROTOCOL

Simple Network Management Protocol (SNMP) enables network management

systems to remotely configure and monitor Discus. Your Internet Service Pro-

vider (ISP) may use SNMP in order to identify and resolve technical problems.

Technical information regarding the properties of Discus SNMP agent should be

provided by your ISP. To configure Discus SNMP agent, perform the following:

1.

Access this feature either from the 'Management' menu item under the 'Sys-

tem' tab, or by clicking its icon in the 'Advanced' screen.

2.

Specify the SNMP parameters, as provided by your Internet service pro-

vider:

Allow Incoming WAN Access to SNMP

Select this check box to allow ac-

cess to Discus SNMP over the Internet.

Read-only/Write Community Names

SNMP community strings are pass-

words used in SNMP messages between the management system and Dis-

Page 142 / 182

PRG AV4202N

Advanced Section

OGU 930500275-A1

135

cus. A read-only community allows the manager to monitor Discus. A read-

write community allows the manager to both monitor and configure Discus.

Trusted Peer

The IP address, or subnet of addresses, that identify which

remote management stations are allowed to perform SNMP operations on

Discus.

SNMP Traps

Messages sent by OpenRG to a remote management station,

in order to notify the manager about the occurrence of important events or

serious conditions. Discus supports both SNMP version 1 and SNMP version

2c traps. Check the Enabled check box to enable this feature. The screen re-

freshes, displaying the following fields.



Version

Select between version SNMP v1 and SNMP v2c.



Destination

The remote management station's IP address.



Community

Enter the community name that will be associated with the

trap messages.

FIGURE 34.

Simple Network Management Protocol Panel

Page 143 / 182

PRG AV4202N

136

OGU 930500275-A1

Advanced Section

SYSTEM LOG

The 'System Log' screen displays a list of recent activities that has taken place

on Discus.

By default, all log messages are displayed one after another, sorted by their or-

der of posting by the system (newest on top). You can sort the messages ac-

cording to the column titles---Time, Component, or Severity. This screen also

enables you to filter the log messages by the component that generated them,

or by their severity, providing a more refined list. This ability is useful mainly for

software developers debugging Discus. By default, the screen displays log

messages with 'debug' severity level and higher, for all components. You may

change the severity level for this filter. To add a new filter, click the 'New Filter'

link or its corresponding icon . The screen refreshes.

Using the drop-down lists, select the component and severity level by which to

sort the log messages. Click 'Apply Filters' to display the messages in your

specified criteria. You can add more filters in the same way, or delete filters us-

ing their respective action icons. Defined filters override the default filter that

displays all messages.

Page 144 / 182

PRG AV4202N

Advanced Section

OGU 930500275-A1

137

FIGURE 35.

System Log Panel

SYSTEM SETTINGS

The System Settings screen allows you to configure various system and man-

agement parameters.

System.

Configures general system parameters.

- Discus's Hostname Specify the gateway's host name. The host name is the

gateway's URL address.

- Local Domain Specify your network's local domain.

Discus Management Console.

Configure Web-based management settings.

- Automatic Refresh of System Monitoring Web Pages. Select this check-box to

enable the automatic refresh of system monitoring web pages.

- Warn User Before Network Configuration. Changes Select this check-box to

activate user warnings before network configuration changes take effect.

Page 145 / 182

PRG AV4202N

138

OGU 930500275-A1

Advanced Section

- Session Lifetime. The duration of idle time (in seconds) in which the WBM

session will remain active. When this duration times out, the user will have to re-

login.

- Language. Select a different language for the WBM interface.

Management Application Ports.

Configure the following management applica-

tion ports:

1.

Primary/secondary HTTP ports

2.

Primary/secondary HTTPS ports

3.

Primary/secondary Telnet ports

4.

Secure Telnet over SSL ports

Management Application SSL Authentication Options.

It allows to define the

Client Authentication options.

System Logging.

Configure system logging parameters.

- System Log Buffer Size. Set the size of the system log buffer in Kilobytes.

- Remote System Notify Level The remote system notification level can be one

of the following: None, Error, Warning and Information.

Security Logging.

Configure security logging parameters.

- Security Log Buffer Size Set the size of the security log buffer in Kilobytes.

- Remote Security Notify Level The remote security notification level can be one

of the following: None, Error, Warning and Information.

Outgoing Mail Server.

Configure outgoing mail server parameters.

- Server Enter the hostname of your outgoing (SMTP) server in the 'Server'

field.

- From Email Address Each email requires a 'from' address and some outgoing

servers refuse to forward mail without a valid 'from' address for anti-spam con-

siderations. Enter a 'from' email address in the 'From Email Address' field.

- Port Enter the port that is used by your outgoing mail server.

- Server Requires Authentication If your outgoing mail server requires authenti-

cation check the 'Server Requires Authentication' check-box and enter your

user name and password in the 'User Name' and 'Password' fields respectively.

SWAP.

If enabled, it allows to define the swap size (MB).

HTTP Interception.

When no Internet connection is available, the Router will

display an attention screen explaining the connection's status instead of the

standard “The page cannot be displayed” window.

Host Information.

It allows to enable/disable the host services auto-detection

feature.

Rate

Popular ADB Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share