Page 71 / 89
Scroll up to view Page 66 - 70
67
Chapter 6
Status
2.
The Gateway’s Home screen appears. Enter your user name and password,
then click
Status
from the row of icons at the top of the screen.
3.
The Status screen appears, with various options for checking the Gateway’s
status listed in the menu on the left side of the screen.
Page 72 / 89
68
VDSL2/GigE Wireless 11n Gateway
Connection Status
Click
Connection Status
from any Status screen to generate the Connection
Status screen. This table displays various parameters regarding the Internet con-
nection of the Gateway, including broadband and ISP connection status, upstream
rate, least time remaining, and DNS addresses. The only user-configurable option
in the screen is the Release/Renew button, which, when clicked, releases and
renews the Gateway’s IP address.
Page 73 / 89
69
Chapter 6
Status
Line 1/Line 2 Status
Click
Line 1 Status
from any Status screen to generate the Line 1 Status screen.
This table displays various parameters relating to the Line 1 connection of the
Gateway, including VPI, downstream speed, and attenuation. There are no user-
configurable options in this screen, but there is a Clear button at the bottom of the
screen (not shown) that resets all of the statistics back to zero, at which time the
statistics will begin accumulating again.
The Line 2 Status screen is identical to the Line 1 screen, and displays parameters
for the Line 2 connection of the Gateway.
Page 74 / 89
70
VDSL2/GigE Wireless 11n Gateway
WAN Ethernet Status
Click
WAN Ethernet Status
from any Status screen to generate the WAN Ethernet
Status screen. This table displays various parameters relating to the WAN Ethernet
connection of the Gateway, including subnet mask, default gateway, and sent pack-
ets. There are no user-configurable options in this screen.
Routing Table
Click
Routing Table
from any Status screen to generate the Routing Table screen.
This screen displays the Gateway’s routing table. There are no user-configurable
options in this screen.
Page 75 / 89
71
Chapter 6
Status
Firewall Status
Click
Firewall Status
from any Status screen to generate the Firewall Status screen.
This table displays the status of the Gateway’s firewall. There are no user-configu-
rable options in this screen. For more details, see chapter 4, Configuring
Firewall Settings.
NAT Table
Click
NAT Table
from any Status screen to generate the NAT Table screen. This
screen displays the Gateway’s NAT table. There are no user-configurable options in
this screen.
19216811.live