Page 46 / 198
Scroll up to view Page 41 - 45
Setting Up a Wireless Network
4.5
Advanced Security Settings
4
46
© 2008 Verizon. All Rights Reserved.
802.1x WEP
If 802.1x WEP (Wired Equivalent Privacy) was selected, the “WEP+802.1x Radius
Settings” screen appears. To generate the full screen, click in the “Enabled” check
box to activate.
802.1x WEP is a robust security protocol that uses port control with dynamically
changing encryption keys automatically updated over the network. 802.1x WEP
uses a RADIUS (Remote Authentication Dial-in Service) server for authentication
purposes. This server must be physically connected to the FiOS Router. Also, the
user must enable the RADIUS client embedded in the FiOS Router (to do this,
see chapter 9, “Advanced Settings”).
Click in the “Enabled” check box to enable WEP+802.1x security.
1.
Enter the RADIUS server IP address in the “Server IP” text boxes.
2.
Enter the RADIUS server’s port number in the “Server Port” text box.
3.
Enter the RADIUS server’s shared secret in the “Shared Secret” text box.
4.
Click
5.
Apply
to save changes.
Page 47 / 198
FiOS Router User Manual
02/11/09
47
© 2008 Verizon. All Rights Reserved.
WPA
If WPA (Wi-Fi Protected Access) was selected, the “WPA Key” screen appears.
Verify the authentication method selected is “Pre-Shared Key.”
1.
Enter a phrase of at least eight characters in the “Pre-Shared Key” text box.
2.
Verify that “ASCII” is selected in the associated drop-down list.
Select the proper encryption algorithm (
3.
TKIP
or
AES
).
Click in the “Group Key Update Interval” check box to activate the group key
4.
update interval, and set the interval time in the text box to the right.
Click
5.
Apply
at the bottom of the screen to save changes.
WPA2
If WPA2
was selected, the “WPA2” screen appears.
Verify the authentication method selected is “Pre-Shared Key.”
1.
Enter a phrase of at least eight characters in the “Pre-Shared Key” text box.
2.
Verify that “ASCII” is selected in the associated drop-down list.
Select the proper encryption algorithm (
3.
TKIP
or
AES
).
Page 48 / 198
Setting Up a Wireless Network
4.5
Advanced Security Settings
4
48
© 2008 Verizon. All Rights Reserved.
Click in the “Group Key Update Interval” check box to activate the group key
4.
update interval, and set the interval time in the text box to the right.
Click
5.
Apply
at the bottom of the screen to save changes.
4.5b
Level 2 (SSID Broadcast)
This section is used to configure the FiOS Router’s SSID broadcast capabilities.
Selecting “SSID Broadcast” generates the “SSID Broadcast” screen.
Click the “Enable” radio button to enable SSID broadcasting. If enabled, the SSID
of the FiOS Router’s wireless network will be broadcast wirelessly. To disable SSID
broadcasting, click the “Disable” radio button.
4.5c
Level 3 (Limiting Access)
This option is used to limit access to the FiOS Router’s wireless network.
Page 49 / 198
FiOS Router User Manual
02/11/09
49
© 2008 Verizon. All Rights Reserved.
Wireless MAC Authentication
Wireless MAC authentication allows the user to allow or deny access to the
FiOS Router’s wireless network by a particular device’s MAC address. Selecting
“Wireless MAC Authentication” from the Advanced Security Settings screen
generates the “Wireless MAC Authentication” screen.
To set up wireless MAC authentication:
Click in the “Enable Access List” check box.
1.
Select either “Accept all devices listed below” or “Deny all devices listed
2.
below” by clicking the appropriate radio button. Selecting “Accept…”
causes all devices listed by MAC address to access the FiOS Router’s wireless
network. Selecting “Deny…” causes all listed devices to be denied access.
Enter the MAC address of a device in the “Client MAC address” text box.
3.
Click
4.
Add
.
Repeat steps 3 and 4 to add more devices to the list.
5.
When finished listing devices, click
6.
Apply
.
To remove a MAC address, select it from the “List” list box, then click
Remove
.
Page 50 / 198
Setting Up a Wireless Network
4.5
Advanced Security Settings
4
50
© 2008 Verizon. All Rights Reserved.
802.11b/g Mode
This option allows the user to select the wireless communication standard
compatible with the devices to be connected on the wireless network from
the drop-down list. Options include
802.11b
,
802.11g
, or
Mixed
(allows both
802.11b and 802.11g-equipped wireless devices to join the network).
4.5d
Other Advanced Wireless Options
Clicking
Other Advanced Wireless Options
at the bottom of the Advanced
Security Settings screen generates another “Advanced Wireless Options” screen.
When should this rule occur?
Displays the time during which the rule is active. To configure schedule rules, see
chapter 9, “Advanced Settings.”
19216811.live