Page 51 / 123
Scroll up to view Page 46 - 50
46
Action
tec 54 Mbps Wireless DSL Gateway User Manual
Time Zone
Selecting
Time Zone
in the “Configuring the Advanced Settings” screen generates
the “Time Zone” screen. In this screen, select the time zone in which the Gateway
is being used. Click in the “Day Light Saving” check box if Daylight Savings Time
is currently in effect where the Gateway is being used.
When finished in this screen, click
Apply
to activate any changes made.
Remote Syslog Capture
Selecting
Remote Syslog Capture
in the “Advanced Setup” screen generates the
“Remote Syslog Capture” screen. In this screen, the user can configure the Gateway
to allow a remote computer to access the Gateway’s system activity logs.
When finished in this screen, click
Apply
to activate any changes made.
Downloaded from
www.Manualslib.com
manuals search engine
Page 52 / 123
47
#
Configuring
Security Settings
This chapter explains how to configure the Gateway’s wired security capabilities,
including firewall settings,
DMZ
hosting, and network address translation.
Accessing Wired Security Screens
To access the Wired Security configuration screens, follow these instructions:
1.
Open a Web browser. In the “Address” text box, type:
then press
Enter
on the keyboard.
6
Downloaded from
www.Manualslib.com
manuals search engine
Page 53 / 123
48
Action
tec 54 Mbps Wireless DSL Gateway User Manual
2.
The “Home” screen appears. Click
Security
.
Downloaded from
www.Manualslib.com
manuals search engine
Page 54 / 123
49
Chapter 6
Configuring Security Settings
3.
A login window appears. Enter the user name and password in the appropri-
ate text boxes, then click
OK
.
☞
Note:
The default user name is “admin.” The default password is
“password.”
Downloaded from
www.Manualslib.com
manuals search engine
Page 55 / 123
50
Action
tec 54 Mbps Wireless DSL Gateway User Manual
4.
The “Security” screen appears. To modify a specific configuration, click on its
name in the menu bar on the left, or from the list in the middle of the screen.
Admin User Name and Password
See “Changing the Password” on page 11.
Firewall
Selecting
Firewall
in the Security screen generates the “Firewall Settings” screen.
Select the level of security needed for the network.
High
If
High
is selected in the “Firewall Security Level” screen, the services listed at the
bottom of the screen (
HTTP
,
DNS
,
FTP
,
IMAP
v
3
,
SMTP
,
POP3
,
NNTP
,
IPSEC IKE
,
IPSEC ESP
,
HTTPS
, and
IMAP
) are the only ones allowed to pass through the firewall.
All other services will be blocked. None of these settings can be changed from here.
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live