Page 11 / 82
Scroll up to view Page 6 - 10
8
Wireless VDSL Modem Router
The Modem Router’s host screen appears. Click
2.
Manual Setup
.
The Quick Setup screen appears, with a row of large icons across the top of the
3.
screen. Click
Homepage
.
Page 12 / 82
9
Chapter 2
Getting Started
The Modem Router’s Home screen appears.
4.
Icon Bar
At the top of the Home screen is the Icon Bar. Here, you can quickly access the
other four main sections of the Modem Router’s firmware by clicking on the appro-
priate icon: Status; Quick Setup, Wireless Setup; Utilities; and Advanced Setup.
Clicking the Home icon in any other firmware screen generates the Home screen.
Internet Services
On the right side of the screen is the Internet Services menu, where there is a series
of four Actiontec links (Actiontec, Actiontec Store, Actiontec How To Zone, and
Actiontec Support) that can help you get the most out of the Modem Router.
Home Network Map
The Home Network map on the Home screen is a graphical representation of the
Modem Router’s network, including how it is connected to the ISP, all devices con-
nected to it through its networks, and the state of the firewall.
Page 13 / 82
10
Wireless VDSL Modem Router
Host Screen
The Modem Router’s Host screen is the first one you will see when connecting to
the Modem Router. It contains four options: Auto Configure Your Modem, From
Provider List Setup Option, Manual Setup, and Log into My Device.
Auto Configure Your Modem
Selecting this option generates a procedure wizard that guides you through auto-
matically connecting the Modem Router with your ISP.
From Provider List Setup Option
Selecting this option generates a procedure wizard that guides you through con-
necting the Modem Router with an ISP that appears on the list that appears. Only
ADSL customers can access this option.
Page 14 / 82
11
Chapter 2
Getting Started
Manual Setup
Selecting this option takes you to the Quick Setup screen. To perform a quick setup:
In the first Quick Setup screen, follow the onscreen instructions, then click
1.
Next
.
Another Quick Setup screen appears. Select the WAN interface you are using
2.
from the WAN Interface drop-down list.
Select the protocol used by your ISP by clicking in the appropriate radio but-
3.
ton. If PPPoE or PPPoA was selected, enter the PPP username and password in
the text boxes that appear.
Click
4.
Apply
to save your changes.
Page 15 / 82
12
Wireless VDSL Modem Router
Log Into My Device
Selecting this option generates a screen asking for your username and password.
After entering them correctly, the Home screen appears, where you can access the
Modem Router’s graphical user interface.
19216811.live