Page 61 / 128 Scroll up to view Page 56 - 60
LAN Settings
65
3
Enter your PPP over Ethernet user name in the
PPPoE User Name
text box.
4
Enter a password in the
PPPoE Password
text box.
5
Enter your PPP over Ethernet service name in the
PPPoE Service Name
text
box. Not all ISPs require a PPPoE service name. Only enter a service name
if your ISP requires this.
6
Enter the
MTU
value supplied by your ISP. If you do not know this, leave it
at the default value. The default is 1454.
7
Select an idle time from the
Maximum Idle Time
drop-down list.
This value will correspond to the amount of idle time (no Internet activity)
that will pass before the Router automatically ends your PPP over
Ethernet session.
Since the Router contains its own PPPoE client, you no longer need to run
PPPoE client software on your computer to access the Internet.
PPTP
PPTP Setup Screen
Page 62 / 128
66
C
HAPTER
5: R
OUTER
C
ONFIGURATION
To setup the Router for use with a PPTP connection, use the following
procedure:
1
Select
PPTP (used by some European providers)
in the
IP Allocation Mode
field.
2
Enter your PPTP server address in the
PPTP Server Address
text box (this is
typically the address of your modem).
3
Enter your PPTP user name in the
PPTP User Name
text box.
4
Enter your password in the
PPTP Password
text box.
5
Enter the
MTU
value supplied by your ISP. If you do not know this, leave it
at the default value. The default is 1460.
6
Select an idle time from the
Maximum Idle Time
drop-down list.
This value will correspond to the amount of idle time (no Internet activity)
that will pass before the Router automatically ends your PPTP session.
7
IP settings must be used when establishing a PPTP connection. To obtain
an IP address
Fill in the
Initial IP Address, Initial Subnet Mask
fields if your ISP has
provided you with these settings.
Check all of your settings, and then click Save.
Page 63 / 128
LAN Settings
67
Heart Beat Signal
Check with your ISP to make sure they support Heart Beat Signal.
To set up the Router for use with a
Heart Beat Signal
connection, use the
following procedure:
1
Select
Heart Beat Signal (For Australia only)
in the
IP Allocation Mode
field.
2
Enter the
Host Name
(optional).
Some ISPs require a host name. If your ISP has this requirement, enter the
host name in the
Host Name
text box.
3
Enter your Heart Beat Signal user name in the
Heart Beat Signal User
Name
text box.
4
Enter your
Heart Beat Signal password
in the
Heart Beat Signal Password
text box.
5
Enter the
MTU
value supplied by your ISP. If you do not know this, leave it
at the default value. The default is 1440.
6
Select an idle time from the
Maximum
Idle Time drop-down list.
This value will correspond to the amount of idle time(no Internet activity)
!
that will pass before the Router automatically ends your PPTP session.
Check all of your settings, and then click
Save
.
Page 64 / 128
68
C
HAPTER
5: R
OUTER
C
ONFIGURATION
Firewall
On the main frame of the
Firewall
setup screen is a menu with six tabs:
Virtual Servers
,
Special Applications
,
PCs Privileges
,
URL Filter
,
Content
Filter
and
SPI
.
Virtual Servers
Selecting the
Firewall
option on the main menu displays the Virtual
Servers setup screen.
Virtual Servers Screen
DMZ (De-Militarized Zone) Host is a computer without the protection of
the firewall. This feature allows a single computer to be exposed to
unrestricted 2-way communication from outside of your network. This
feature should be used only if the Virtual Server or Special Applications
options do not provide the level of access needed for certain applications.
To configure one of your computers as a DMZ host, enter the last digit(s)
of the IP address of the computer in the
IP Address of DMZ Host
text box,
and then click
Save
.
Virtual DMZ
Page 65 / 128
Firewall
69
Virtual Server
Activating and configuring a virtual server allows one or more of the
computers on your network to function as a public server. For example,
one of your computers could be configured as an FTP server, allowing
others outside of your office network to download files of your choosing.
Or, if you have created a Web site, you can configure one of your
computers as a Web server, so that others can view your Web site.
If you want to host ftp server or online gaming, you must open up ports
on the router. This page allows you to setup port forwarding for the
specified applications.
Before using forwarding, you should assian static IP addresses to the
designated PCs.
Click Save to save the settings.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top