Access the Management and Diagnostic Console

44

Local Network - Address Allocation Page

The Local Network - Address Allocation page shows the name and IP address of each device on the

gateway’s local network, and allows you to create DHCP mappings for each device.

For details on network address allocation, refer to “Editing Address Allocation Settings” on page 25.

Access the Management and Diagnostic Console

45

Local Network - Configure the MoCA Network Page

The Configure the MoCA Network page allows you to change the channel upon which the MoCA signal is

sent or received, enable or disable network privacy, and set the password for network privacy. These

settings are only used when the gateway is connected via MoCA. When MoCA is used through external

devices, these settings are not applicable.

Access the Management and Diagnostic Console

46

Local Network - MoCA Statistics Page

The MoCA Statistics page shows connection rates to other MoCA devices.

•

If the 3700HGV-B is the coordinator, the link rate to the slaves.

•

If the 3700HGV-B is not the coordinator, the link rate to the coordinator.

Access the Management and Diagnostic Console

47

Firewall - Settings Page

The Firewall - Settings page allows you to configure the firewall to pass through specific application data to

a selected computer.

For details on configuring the firewall, refer to page 28.

Access the Management and Diagnostic Console

48

Firewall - Detailed Information Page

The Firewall - Detailed Information page shows detailed information about the gateway’s firewall.