Page 76 / 138 Scroll up to view Page 71 - 75
Management and Diagnostic Console
71
Local Network - Status Page
The Local Network – Status page shows the status of the local network.
Figure 29. MDC Local Network Status Page
The Local Network – Status page includes the following information:
Item
Description
IP
Gateway
The IP address allocated to the 2Wire gateway.
IP Network
The IP address used by the network.
Subnet Mask
The subnet mask allocated to the 2Wire gateway.
DHCP Range
The range of IP addresses available on the network, the
number of addresses Allocated, and the number of
addresses Remaining.
Page 77 / 138
Management and Diagnostic Console
72
DHCP Timeout
The time, in minutes, before the DHCP lease must be
renewed.
Devices
Ethernet
The number of Active and Inactive Ethernet devices on
the network.
Wireless (802.11)
The number of Active and Inactive wireless devices on the
network.
USB
Specifies whether a USB device is present (Active) on the
network. If a USB device is not present, the value is
Inactive.
Public Network
Router Address
Defines a separate network on the home side.
Subnet Mask
The subnet mask allocated for public address.
Bridge Network
Router Address
Creates a bridge network with the broadband.
Subnet Mask
The subnet mask allocated for public address.
Note:
If you have Enhanced Services (such as Internet Access Control) installed, the specific
service and its status display in the Devices panel.
Item
Description
Page 78 / 138
Management and Diagnostic Console
73
Local Network - Statistics Page
The Local Network – Statistics page shows information about the interfaces on the local network.
Figure 30. MDC Local Network Statistics Page
The Local Network – Statistics page includes the following information:
Item
Description
Ethernet
Transmit
The cumulative number of frames transmitted over the
Ethernet home network interface, the number of payload
bytes transmitted, and the number and percentage of
transmitted packets in error.
Page 79 / 138
Management and Diagnostic Console
74
To reset the local network statistics, click the
Reset
button.
Receive
The cumulative number of frames received over the
Ethernet home network interface, the number of payload
bytes received, and the number and percentage of
received packets in error.
Wireless (this field is present only on wireless 2Wire gateway models)
Transmit
The cumulative number of frames transmitted over the
wireless home network interface, the number of payload
bytes transmitted, and the number and percentage of
transmitted packets in error.
Receive
The cumulative number of frames received over the
wireless home network interface, the number of payload
bytes received, and the number and percentage of
received packets in error.
USB
Transmit
The cumulative number of frames transmitted over the
USB home network interface, the number of payload bytes
transmitted, and the number and percentage of
transmitted packets in error.
Receive
The cumulative number of frames received over the USB
home network interface, the number of payload bytes
received, and the number and percentage of received
packets in error.
Item
Description
Page 80 / 138
Management and Diagnostic Console
75
Local Network - Device List Page
The Local Network - Device List page displays information about each device in the local network.
Figure 31. MDC Local Network Device List Page
The following information is displayed.
Identity.
The name of the device. If the device does not have a name associated with it, the device IP
address is displayed.
Type.
The type of connection used by the device to connect to the local network: Ethernet, USB, or
Wireless.
MAC Address.
The hardware address used by the device.
IP Address.
The IP address used by the device.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top