UStec TP-IPR8 Router Manual PDF (Setup & Configuration Guide)

Home

Manuals

UStec

TP-IPR8

Page 26 / 99 Scroll up to view Page 21 - 25

UStec Structured Wiring Users Manual

Page 27 / 99

UStec Structured Wiring User Manual

800 Series for CATV

The 800 series for CATV is designed for homes which are wired with UStec

2X2 tecWire for up to 8 multimedia tecPort locations. The tecLAN800 Basic

models and higher include a digital CATV ampliﬁer with a built-in high pass

ﬁlter to eliminate potential interference with cable channels from in-home

generated VCR,DVD or camera channels. Up to 10 phone locations may be

provided, each with 4 phone line capacity. The optional holsters provide a

hinged mounting bracket for cable modems, DSL modems and home server

appliances.

(Holster standard on iLAN systems)

Common to all systems is the UX-10x cabinet that houses all the tecWire and

tecCenter panel equipment. Each cabinet houses an electrical outlet in the

lower right hand corner to power UStec and third part peripherals.

Each system is enclosed in a integrated plastic cover and drywall trim kit.

Each cover can be locked with the addition of the cover locking kit, part

number UX-408.

Optional satellite connectivity can be added to these system. For more

advanced satellite options look at the 800 series for satellite. Contact your

dealer for more information.

tecReady 800

This system uses the UX-222 service module and is designed to distribute an

off-air or cable television signal and distribute it in up 4 different locations

in the home. It can accept up to four telephone lines and distribute them to

10 different locations in the home. Additionally it has a RJ31X line grabbing

interface for a security panel. This system can be upgraded to any of the fol-

lowing systems.

tecLAN 800 Basic

This system is designed to distribute an off-air or cable television signal up

to 8 different locations in the home. The CX-AMP8 is a studio quality

ampliﬁer built to the highest standards that cable companies require. Off air

antenna or cable television service enter the input on the CX-AMP8. The

ampliﬁer then ampliﬁes the signal enough to cover the splitting of the signal

Page 28 / 99

UStec Structured Wiring Users Manual

and sends it out to 8 different television locations via the TV out ports. Addi-

tionally there are 8 internal inputs for the input of in home generated signals.

The module has an integrated internals to take in home generated signals

from an optional RF modulator and pass them for distribution to all rooms

in the home. Examples might be a DVD player that you would also like to see

in the bedroom. The TP-DM10B telecom module will distribute up to 4

incoming telephone lines out to 9 different locations in the home. This

device can be upgraded to any of the following 800 series systems.

tecLAN 800

This system is The CX-AMP8 is a studio quality ampliﬁer built to the highest

standards that cable companies require.The off air antenna or cable televi-

sion service enter the input on the CX-AMP8. The ampliﬁer then ampliﬁes

the signal enough to cover the splitting of the signal and sends it out to 8

different television locations via the TV out ports. Additionally there are 8

internal inputs for the input of in home generated signals. The module has

an integrated internals to take in home generated signals from an optional

RF modulator and pass them for distribution to all rooms in the home.

Examples might be a DVD player that you would also like to see in the bed-

room.

Up to 4 incoming telephone lines are plugged into the TP-IN4RS module.

This device will surge protect all 4 incoming telephone lines and distribute

them to 10 different locations via the TP-DM10R module. Additionally the

TP-IN4RS module provides security line grabbing interfaces (RJ31X) on tele-

phone lines 1 and 2. This module also provides a conduit to Key System

telephone Units (KSU). This system can be upgraded to the following sys-

tems.

iLAN 800

This system is designed to distribute off-air or cable television signal up to 8

different locations in the home. The CX-AMP8 is a studio quality ampliﬁer

built to the highest standards that cable companies require. The off air

antenna or cable television service enter the input on the CX-AMP8. The

ampliﬁer then ampliﬁes the signal enough to cover the splitting of the signal

and sends it out to 8 different television locations via the TV out ports. Addi-

tionally there are 8 internal inputs for the input of in home generated sig-

nals. The module has an integrated internals to take in home generated

Page 29 / 99

UStec Structured Wiring User Manual

800 Series for CATV

signals from an optional RF modulator and pass them for distribution to all

rooms in the home. Examples might be a DVD player that you would also

like to see in the bedroom.

Up to 4 incoming telephone lines are plugged into the TP-IN4RS module.

This device will surge protect all 4 incoming telephone lines and distribute

them to 10 different locations via the TP-DM10R module. Additionally the

TP-IN4RS module provides security line grabbing interfaces (RJ31X) on tele-

phone lines 1 and 2. This module also provides a conduit to Key System tele-

phone Units (KSU).

Two 10/100 Ethernet switches are included as well for a total nine ports. It

provides for the connection of up to 8 different computers in addition to a

broadband sharing device that is mounted in the included gateway holster.

The ﬂexible holster design is capable of handling a host of broadband devices

from cable modem routers, xDSL routers, even third party servers.

iLAN 800 – GS