UStec TP-IPR8 Router Manual PDF (Setup & Configuration Guide)

Page 31 / 99 Scroll up to view Page 26 - 30

UStec Structured Wiring User Manual

31

800 Series for CATV

•

VOD

•

Gaming

•

Energy Management

•

HVAC Automation

•

Appliance Controls

Page 32 / 99

32

UStec Structured Wiring Users Manual

Page 33 / 99

UStec Structured Wiring User Manual

33

800 Series for Satellite TV & Antenna

The HDTV Satellite TV model lines deliver full high deﬁnition satellite signals

throughout the home to satellite receivers at up to 8 TV set locations. Satellite

signals are distributed though the “Internal” coax tecPort wall connections

along with cable or off-air broadcast TV through the “TV” coax tecPort con-

nections.

The system does not restrict modulated inputs at any tecPort loca-

tion.

The 800 Satellite Series offers only passive broadcast TV signal

distribution. This conﬁguration is not recommended for CATV applications

since it requires a minimum of 15 dB signal input levels and lacks the guard

band high-pass ﬁlter that the CX-AMP series ampliﬁers provide.

Common to all systems is the UX-10x cabinet that houses all the wire and tec-

Center equipment. Each cabinet houses an electrical outlet in the lower right

hand corner to power UStec and third part peripherals.

Each system is enclosed in a integrated plastic cover and drywall trim kit.

Each cover can be locked with the addition of the cover locking kit, part num-

ber UX-408.

tecSat 800 Basic

This system is capable of distributing satellite and pre-ampliﬁed off air

antenna signals to 8 different locations throughout the home. The CX-

HDA58 module is an integrated satellite/off-air distribution system. The sat-

ellite multiswitch will handle 2 or 4 LNB (HDTV) input cables from the sat-

ellite dish(s) for independent distribution to 8 locations. The multiswitch

has an integrated internals ampliﬁer to take in home generated signals from

an optional RF modulator and pass them for distribution to all rooms in the

home. This occurs by combining the in home generated signals with the off

air antenna via the TV out ports.

The TP-DM10B telecom module will distribute up to 4 incoming telephone

lines out to 9 different locations in the home. This system can be upgraded

to the following systems.

Page 34 / 99

34

UStec Structured Wiring Users Manual

tecSAT 800

This system is capable of distributing satellite and off air antenna to 8 differ-

ent locations throughout the home. The CX-HDA58 module is an integrated

satellite/off-air distribution system. The satellite multiswitch will handle 2

or 4 LNB (HDTV) input cables from the satellite dish(s) for independent

distribution to 8 locations. The multiswitch has an integrated internals

ampliﬁer to take in home generated signals from an optional RF modulator

and pass them for distribution to all rooms in the home. This occurs by

combining the in home generated signals with the off air antenna via the TV

out ports.

Up to 4 incoming telephone lines are plugged into the TP-IN4RS module.

This device will surge protect all 4 incoming telephone lines and distribute

them to 10 different locations via the TP-DM10R module. Additionally the

TP-IN4RS module provides security line grabbing interfaces (RJ31X) on tele-

phone lines 1 and 2. This module also provides a conduit to Key System tele-

phone Units (KSU). This unit can be upgraded to the iSAT 800.

iSAT 800

This system is capable of distributing satellite and off air antenna to 8 differ-

ent locations throughout the home. The CX-HDA58 module is an integrated

satellite/off-air distribution system. The satellite multiswitch will handle 2 or

4 LNB (HDTV) input cables from the satellite dish(s) for independent distri-

bution to 8 locations. The multiswitch has an integrated internals ampliﬁer

to take in home generated signals from an optional RF modulator and pass

them for distribution to all rooms in the home. This occurs by combining

the in home generated signals with the off air antenna via the TV out ports.

Up to 4 incoming telephone lines are plugged into the TP-IN4RS module.

This device will surge protect all 4 incoming telephone lines and distribute

them to 10 different locations via the TP-DM10R module. Additionally the

TP-IN4RS module provides security line grabbing interfaces (RJ31X) on tele-

phone lines 1 and 2. This module also provides a conduit to Key System tele-

phone Units (KSU)

Two 10/100 Ethernet switches are included as well for a total nine ports. It

provides for the connection of up to 8 different computers in addition to a

broadband sharing device that is mounted in the included gateway holster.

Page 35 / 99

UStec Structured Wiring User Manual

35

800 Series for Satellite TV & Antenna

The ﬂexible holster design is capable of handling a host of broadband devices

from cable modem routers, xDSL routers, even third party servers.

Rate

Popular UStec Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share