TRENDnet TEW-812DRU Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of TRENDnet TEW-812DRU router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 10
TEW-812DRU(V1.0R) /01.03.2013
Page 2 / 10
Installation Requirements
Package Contents
1. Before You Start
1
TEW-812DRU
Multi-Language Quick Installation Guide
CD-ROM (User’s Guide)
Network cable (1.5 m /5 ft.)
Power adapter (12V DC, 2A)
A computer with a wired or wireless network adapter and Web browser
Broadband internet
Installed modem
Page 3 / 10
2
2. Installation
1.
Verify that you have an Internet connection.
2.
Power down your modem.
3.
Disconnect the network cable from your modem and your computer.
4.
Connect your modem to the TEW-812DRU's WAN port.
5.
Connect your computer to one of the
TEW-812DRU’s LAN ports.
6.
Connect the power adapter to the
TEW-812DRU and then to a power outlet.
7.
Power on your modem. Wait until the LEDs indicate that modem is fully booted up. For more
information on your modem's LEDs, please consult with your modem's user's guide.
8.
Verify that the status LED indicators on the front of the router to confirm that the device is fully
functional
Power (Green), Internet (Green/Blinking), Wireless (Blue) and the wired port
(1, 2, 3, 4) your computer is connected to (Green).
5
Internet
4
Page 4 / 10
3
Note
: It is recommended that you configure the Wireless Router from a wired computer.
9.
Open your web browser, type
http://192.168.10.1 in the Address bar, and
then press
Enter
.
10.
Enter the User Name and Password and
then click
OK
. By default:
User Name
: admin
Password
: admin
Note
: User name and Password are case
sensitive.
11.
Click
Wizard
.
Wireless
Wired Ports
Internet
Power
Page 5 / 10
4
14.
Select
DHCP Connection (Dynamic IP
Address)
. Then click
Next
. (Dynamic IP is
typical for most ISP services. Verify service
with your ISP.)
Note: If you have a service other than
Dynamic IP, refer to the User's Guide for
installation instructions.
18.
For added security the
TEW-812DRU
's
wireless network is pre-encrypted with its
own unique network security key. You can
find the unique security key and the
pre-assigned network name (SSID) on a
sticker on the front of the router and on the
label on the bottom of the router. You will
need this information to connect to the
router. To change the network security key
select Launch Wireless Security Setup
Wizard under the Wizard tab. If the router is
reset to factory defaults, the wireless
encrption will reset to the network security
key printed on the product label on the
bottom of the router.
Note:
For instructions on using your USB
device with the TEW-812DRU, please refer
to the user's guide on the provided CD-ROM
17.
Open up your browser and enter in a
website (e.g. www.trendnet.com) to verify
that you have Internet connection.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top