DISCUS™ DRG A124G

GURE 10

Network panel on MAC OS 10.x

5.

Click

Apply Now

button.

6.

Click on the

Register

button to save the changes in the Control Panel.

7.

Enter

in the address bar of your browser to open the

DISCUS™ DRG A124G

Login Page.

WI-FI CONNECTION

It requires a computer with 802.11b/g (Wi-Fi Certified) wireless adapter installed.

1.

Install your wireless adapter according to the manufacturer’s instructions and

verify that your computer is set to obtain an IP address automatically (DHCP

mode).

You will need to properly configure your adapter to communicate with the

DISCUS™ DRG A124G

according to the configuration rules.

2.

In the configuration window of your wireless adapter scan the wireless net-

work (marked with the relevant SSID name) present in your physical envi-

ronment.

3.

Select the SSID of the

DISCUS™ DRG A124G

© (2008) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

20

OGU 930500195-A1

Hardware Installation

DISCUS™ DRG A124G

Complete the configuration of the wireless adapter with the same parame-

ters of the

DISCUS™ DRG A124G

which are:

•

RF channel; automatically detect (default = 6)

•

WEP encryption enable or disable (default = Disable)

•

WEP key size

•

WEP key used

To check the connection, connect to the

DISCUS™ DRG A124G

Login Page

(see

Figure 11) , entering http://192.168.1.1

FIGURE 11

DISCUS™ DRG A124G Login Page

© (2008) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

Hardware Installation

OGU 930500195-A1

21

DISCUS™ DRG A124G

© (2008) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

22

OGU 930500195-A1

Hardware Installation

This Page has been intentionally left blank

© (2008) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

Router Configuration

OGU 930500195-A1

23

Router

Configuration

Upon TCP/IP configuration on a client computer, it is possible to configure the

Router using the web browser. Internet Explorer 5.5 or above, Netscape Navi-

gator, Mozilla, Firefox and Opera are supported.

To access the management interface, enter the default IP address of the Router

in your web browser: http://192.168.1.1. The default login ID is "

admin

" and de-

fault password is "

admin

" (see

Figure 1). Click

LOGIN

button to access the

management interface.

FIGURE 1

Access Screen

(Login)

DISCUS™ DRG A124G

Password can contain from 3-12 alphanumeric characters and is case sensitive.

MANAGEMENT INTERFACE

The Setup Wizard is located on the top of the left hand side. Use the setup Wi-

zard for a quick and easy configuration of your Internet connection and basic

wireless settings.

MAKING CONFIGURATION

CHANGES

Configurable parameters have a dialog box or a drop-down menu. Once a con-

figuration change has been made on a screen, click

APPLY > SAVE SET-

TINGS

or

NEXT

buttons on the screen to enable the new settings.

ADVANCED

CONFIGURATION

PARAMETERS

The left-hand side displays the main menu and the right-hand side shows de-

scriptive Status information (see

Figure 2). The main menu item is described in

Table 1.

FIGURE 2

Router Home Page

In the table below, the list of command menu items used for Router Manage-

ment is shown.

© (2008) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

24

OGU 930500195-A1

Router Configuration