Netopia 2246N-VGx Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of Netopia 2246N-VGx router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 2
When you use the Netopia Installation Guide Wizard, it will automatically run your Web browser at the appropri-
ate time, and take you to your Gateway’s web-based Quickstart page. If it fails to do this, you can access the con-
figuration pages at any time as follows:
1.
Run a Web browser, such as Firefox, Safari, or Microsoft Internet Explorer, and enter
in the URL Address text box.
Press Return.
2.
For security purposes you must create a password for your Gateway. Enter a new password,
repeat it, and click the Submit button.
You will be asked to log in to your Gateway with a
UserName and Password.
The default UserName is
admin
. Enter the Password
you just created. Type these in their respective fields
and click
OK
.
The browser displays the
Quickstart
page.
3.
Enter the Username and Password assigned to you by your service provider.
Click the
Connect to the Internet
button.
After your Gateway negotiates its connection, you will be redirected to a Netopia web page where you may regis-
ter your Gateway.
Congratulations!
Your connection is up and running and you should be able to browse the Internet by typing a
URL address in your browser’s Address text box or by selecting any of your favorite bookmarks.
Quickstart Guide
Netopia
®
2246N-VGx DSL Gateway
4-Port Ethernet
Check your package contents. It should contain the items shown here:
If you don’t have everything, contact your supplier immediately.
Technical Support:
If you have any questions or run into any difficulty, answers to many frequently asked product-related questions,
as well as full product documentation with advanced configuration instructions, are also available on-line at:
The Netopia CD also contains a Documentation folder with Important Safety Instructions and other
documentation.
Note the serial number (SN:) of your Gateway. It is located on the label on the bottom of the Gateway below the
model number. You will need the Gateway’s serial number if you need to call for technical support.
Configure Your Netopia Gateway
4
Checklist
1
Netopia Gateway
CD & Quickstart Guide
Yellow RJ-45
Ethernet Cable
Gray RJ-11
Telephone Cable
Power
Supply
B
ROADBAND
WITHOUT
B
OUNDARIES
Netopia Part Number:
6180149-AT-02
Copyright 2005, Netopia, Inc. Netopia and the Netopia logo are registered trademarks belong-
ing to Netopia, Inc., registered U.S. Patent and Trademark Office. Broadband Without Bound-
aries is a trademark belonging to Netopia, Inc. All other trademarks are the property of their
respective owners. All rights reserved.
1
4
Downloaded from
www.Manualslib.com
manuals search engine
Page 2 / 2
1.
Decide on a location for the Gateway.
Put the Gateway in a location where air can circulate freely around it.
2.
Power the Gateway.
Connect the power supply to the power jack on the back panel of the Gateway. Then, plug the power supply
into an electrical outlet. Turn on the Power switch.
The
Power
LED should light solid green.
3.
Insert the Netopia CD into your CDROM drive.
The Netopia Installation Guide Wizard automates several tasks to get you up and running easily. Run the
Wizard on every Windows-based PC that will connect to your network.
The Installation Guide Wizard should start automatically and the Welcome screen should appear to step
through your connection installation(s).
The Installation Guide Wizard lets you choose which type
of Netopia device you are installing, and where you are
installing it. Choose
Install via Ethernet
and click the
Next
button.
Follow the on-screen instructions to make all of your con-
nections.
Be sure to configure each computer connected to your Netopia Gateway to accept a Dynamically-assigned IP
address, commonly referred to as DHCP.
Set up your Gateway
Configure Your PCs for DHCP
2
3
DSL
POWER
4
3
ETHERNET
2
1
RESET
ON
O F
LED
Behavior
Power
Green
when power is on.
Red
if device malfunctions.
Ethernet 1, 2, 3, 4
Solid
green
when connected. Flashes
green
when there is
activity on the LAN.
DSL
Solid
green
when Internet connection is established.
Internet
Solid
green
when Gateway is connected. Flashes
green
when
transmitting or receiving data on the WAN port.
O
P
W R
E
1
2
3
4
ETHER NET
S
D
L
N
I
E
T
N
R
T
E
Telephone/DSL jack
DC Power
Rear View
DSL Port
Ethernet
Ports
Power Switch
Power
Ethernet 1, 2, 3, 4
DSL
Top View
Internet
When all of your connections are made, your connections should look like this:
Power outlet
Note:
You will need an extra hub or switch if more Ethernet ports are needed.
3
2
Downloaded from
www.Manualslib.com
manuals search engine

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top