1. Home
    2. /
  2. Manuals
    3. /
  3. MediaLink
    4. /
  4. MWN-WAPR150N
    5. /
  5. 7
Page 31 / 76 Scroll up to view Page 26 - 30
MWN-WAPR150N Wireless Router
Chapter 5 Advanced Settings
5.1 LAN Settings
LAN Settings are for the basic TCP/IP parameters of LAN
ports.
±
MAC Address:
The Router’s physical MAC address as
seen on your local network, which is unchangeable.
±
IP Address:
The Router’s LAN IP addresses (not your
PC’s IP address). 192.168.0.1 is the default value.
±
Subnet Mask:
The Router’s subnet mask is the
measurement of the network size. 255.255.255.0 is the
default value.
±
IMPORTANT:
Once you modify the IP address, you
need to remember it for the next time you login to the
Web-based Utility.
27
Page 32 / 76
MWN-WAPR150N Wireless Router
5.2 WAN Settings
After you have selected the ISP connection type in “Setup
Wizard” here is where you can modify the related settings.
PPPoE
Virtual Dial-up
（
）
±
Connection Mode
: Shows your current connection
mode.
±
Account
: Provided by your ISP.
±
Password
: Provided by your ISP.
±
MTU
: Maximum Transmission Unit. It is the size of
largest datagram that can be sent over a network. The
default value is 1500. Do not modify it unless necessary.
28
Page 33 / 76
MWN-WAPR150N Wireless Router
If some websites or web application software can not be
open or enabled, try to change the MTU value to a lower
value like 1492, 1450, 1400, etc.
±
Service Name
: Defined as a set of characteristics
that are applied to a PPPoE connection. Enter it if
provided. Do NOT modify it unless necessary.
±
AC Name
: Enter it if provided. Do NOT modify it unless
necessary.
±
Connect Automatically
: Connect automatically to the
Internet after rebooting the system or connection
failure.
±
Connect Manually
: Connect to the Internet manually.
±
Connect on Demand
: Re-establish your connection to
the Internet after the specific time (Max Idle Time). Zero
means your Internet will stay connected at all times.
Otherwise, enter the minutes to be elapsed before you
want to disconnect the Internet access.
±
Connect on Fixed Time
: Connect to the Internet
during the time you specify.
Notice:
The “Connect on Fixed Time” can be deployed only when
you have set the current time in “Time Settings” from
“System Tools”.
29
Page 34 / 76
MWN-WAPR150N Wireless Router
Static IP
If your connection mode is Static IP, you can modify the
following addressing information.
±
IP Address:
Here enter the WAN IP address provided
by your ISP.
±
Subnet Mask:
Enter the WAN Subnet Mask here.
±
Gateway:
Enter the WAN Gateway here.
±
Primary DNS Server:
Enter the Primary DNS server
provided by your ISP.
±
Secondary DNS Server:
Enter the secondary DNS.
30
Page 35 / 76
MWN-WAPR150N Wireless Router
5.3 MAC Address Clone
This page is for the Router’s MAC address to WAN.
Some ISPs require end-user's MAC address to access their
network. This feature copies the MAC address of your
network device to the Router.
±
MAC Address:
The MAC address to be registered with
your Internet service provider.
±
Clone MAC Address:
Register your PC's MAC address.
±
Restore Default MAC Address:
Restore to the default
hardware MAC address.
5.4 DNS Settings
DNS is short for Domain Name System (or Service), an
Internet service that translates domain names into IP
addresses which are provided by your Internet Service
Provider. Please consult your Internet Service Provider for
details if you do not have them.
31

Rate

3.5 / 5 based on 2 votes.

Popular MediaLink Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top