1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DI-714P+

D-Link DI-714P+ Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of D-Link DI-714P+ router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 16
This product can be set up using
any current web browser, i.e.,
Internet Explorer 6 or Netscape
Navigator 6.2.3.
DI-714P+
2.4GHz Wireless Router
and Print Server
5V DC Power Adapter
©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
specifications subject to change without notice. DI-714P+. 04042003
Before You Begin
1.
If you purchased this router to share your high-speed Internet connection with other
computers, you must have either an Ethernet-based Cable or DSL modem with an
established Internet account from an Internet Service Provider (ISP).
2.
It’s best to use the same computer that is connected to your modem for configuring
the DI-714P+ Wireless Router. The DI-714P+ acts as a DHCP server and will
assign all the necessary IP address information on your network.
See Appendix at
the end of this Quick Installation Guide or the Manual on the CD-ROM for
setting each network adapter to automatically obtain an IP address.
Check Your Package Contents
DI-714P+ 2.4GHz Wireless Router
CD-ROM (containing Manual and Warranty)
Ethernet (CAT5 UTP/Straight Through) Cable
Using a power supply
with a different voltage
rating will damage and void
the warranty of this product.
If any of the above items are missing, please contact your reseller.
Page 2 / 16
Connecting The DI-714P+ Wireless Router To
Your Network
B.
WAN PORT
This is for the connection
of an Ethernet cable to the
Cable or DSL modem
C.
LAN PORTS
These are the
connections for Ethernet
cables to Ethernet
enabled computers.
A.
First, connect the power adapter to the
receptor
at the back panel of the DI-714P+ and
then plug the other end of the power adapter to a wall outlet or power strip. The Power
LED will turn
ON
to indicate proper operation.
B.
1. Power off your Cable or DSL modem; some devices may not have a on/off switch and
will require you to unplug the power adapter. Now, the DI-714P+ should be powered on
and the Cable / DSL modem should be turned off.
2. Cable / DSL modem (
Power Off
) – DI-714P+ (
Power On
)
Connect an Ethernet cable to the Ethernet jack located on the Cable / DSL modem. After
the Ethernet cable is securely connected, power on the Cable / DSL modem by turning
on the unit or plugging in the power adapter.
3. Cable / DSL modem (
Power On
) – DI-714P+ (
Power On
)
Insert the other end of the Ethernet cable to the WAN PORT on the back panel of the DI-
714P+. The WAN LED light will illuminate to indicate proper connection. If the WAN LED
is not illuminated, please go back and step B and repeat its instructions.
C.
Insert an Ethernet cable to
LAN port 1
on the back panel of the
DI-714P+ and an
available Ethernet port on the network adapter in the computer you will use to configure
the DI-714P+. The LED light for LAN Port 1 will illuminate to indicate proper connection.
(Note: The LAN Ports on the DI-714P+ are Auto-MDI/MDIX.
Meaning you can use a
straight-through or crossover-Ethernet cable to the LAN Ports.)
D.
Computers equipped with 802.11b wireless adapters will be able to connect to the DI-
714P+. The DWL-650+
Air
Plus Wireless Cardbus Adapter and the DWL-520+
Air
Plus
Wireless PCI Adapter will be able to connect out of the box with the router using their
default wireless settings.
E.
The parallel port on the DI-714P+ is used to connect printers only.
Connect one
end of
the printer cable to your printer and the other end to the DI-714P+.
Reset Button
Pressing this button restores the Router
to its original factory default settings.
D.
Antennas
Used to
wirelessly
connect to
802.11b
adapters.
A.
Receptor for
Power Adapter
.
E.
Printer Port
You can connect a Printer
to the Parallel Port here.
Page 3 / 16
3
Restart Your Computer
Connecting Additional Computers To The
DI-714P+
Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet-equipped
computers to the remaining Ethernet LAN ports on the back panel of the DI-714P+
WAN LED
– a solid light
indicates connection on the
WAN port.
This LED blinks
during data transmission.
LOCAL NETWORK LEDs
– a
solid light
on the port indicates
a connection to an Ethernet
enabled computer on ports 1-4.
This LED blinks during data
transmission.
POWER LED
– a solid
light indicates a proper
connection to the power
supply.
M1 LED
– will flash
consistently to indicate
that the DI-714P+ is
working properly.
M2 LED
– a solid light
indicates that Internet
connection has been
established.
WLAN LED
– a solid light
indicates that the wireless
segment is ready.
This LED
blinks during wireless data
transmission.
Page 4 / 16
4
When you have completed the steps in this
Quick Installation
Guide,
your connected network should look similar to this:
Using The Setup Wizard
The logon pop-up screen will appear.
Open your Web browser
and
type
into the
URL address box. Then press the
Enter
or
Return
key.
Type
“admin”
for the username and
leave the password field blank.
Click
OK
Page 5 / 16
5
The Setup Wizard (continued)
Once you have logged in, the
Home
screen will appear.
You will see the following screens
Set up your new password
.
You have the option to
establish a password.
Click
Run Wizard
Click
Next
Click
Next

Rate

4.5 / 5 based on 2 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top