Zyxel P660H-T3 Router Manual PDF (Setup & Configuration Guide)
Given below is full router user manual of Zyxel P660H-T3 router model. You can also download this manual in PDF Format to read later on your computer.
Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.
Page 1 / 11
P-660H-Tx v2
ADSL2+ 4-port Gateway
Quick Start Guide
Version 3.40
2/2007
Edition 1
Page 2 / 11
P-660H-Tx v2 Quick Start Guide
2
Overview
The P-660H-Tx v2 is an ADSL router with a four-port built-in Ethernet switch.
See your
User’s Guide
for background information on all features.
This Quick Start Guide shows you how to:
•
Connect the hardware.
•
Set up your Internet connection. The device should connect to the Internet automatically if it is preconfigured. If
you were given Internet connection information from your Internet Service Provider (ISP), you may have to
set up the connection manually (See section
3
).
How to use the included CD
If you prefer to see a multi-media animation of how to make hardware connections, see the installation tutorial
on the included CD.
1
On the included CD, click
Multimedia Auto Provisioner
>
Installation Tutorial
.
2
At the end of the tutorial, click
Configuration Genie
to set up your P-660H-Tx v2 to connect to the Internet.
Page 3 / 11
P-660H-Tx v2 Quick Start Guide
3
1 Hardware Connections
1 DSL
: Use the gray telephone wire to connect your P-660H-Tx v2’s
DSL
port to a telephone jack (or to a
splitter, if one is already installed).
2 ETHERNET
: Use the yellow Ethernet cable to connect a computer to an
ETHERNET
port for initial
configuration and/or Internet access.
3 POWER
: Use the power adaptor provided with your P-660H-Tx v2 to connect an appropriate power source
to the
POWER
socket. Make sure the power source is on.
4
Push in the
POWER
button.
5
Look at the lights on the front panel.
Page 4 / 11
P-660H-Tx v2 Quick Start Guide
4
• The
POWER
light blinks while your P-660H-Tx v2 starts up and stays on once it is ready.
• The
DSL
light is on when the P-660H-Tx v2 has a DSL connection.
• The
INTERNET
light is on when you are able to access the Internet and blinks when the P-660H-Tx v2 is send-
ing or receiving data.
• Each
ETHERNET
light stays on if the corresponding
ETHERNET
port is properly connected and blinks when
there is traffic.
If any of these lights are not on, check your connections, and inspect your cables for damage. If the lights are
still off, contact your local vendor.
2 Internet Connection Setup: Automatic
Use this section to have your P-660H-Tx v2 automatically detect and set up your Internet connection.
1
Open your web browser, and go to any web page (for example,
19216811.live