Page 121 / 142
Scroll up to view Page 116 - 120
Table 33. L2TP/PPTP Menu Option
Option
Description
PPP Address Range
(Start/End)
Configure the dedicated IP address pool for L2TP/PPTP. The
LAN IP subnet at one end of the VPN tunnel must be different
from the LAN
IP subnet at the other end of the VPN tunnel. For example, if
one side’s LAN subnet is 192.168.
0
.x, then the other side
should be 192.168.
1
.x (where the subnet mask in this
example is 255.255.255.0).
Select Enable to enable MPPE (Microsoft Point-to-Point
Encryption). MPPE is used to enhance the confidentiality of
PPP-encapsulated packets. It uses the RSA RC4 encryption
algorithm.
PPP Security (MPPE
Encryption)
Enter the user name for the L2TP or PPTP tunneling.
Username
Enter the password for the L2TP or PPTP tunneling.
Password
Re-enter to confirm the password.
Confirm Password
Show the existing user list.
User List
L2TP Server
(Preshared Phrase)
Enter a key (Pre-Shared key) for authentication. This key is
used by IPSec to validate the computer as a trusted machine.
121
Page 122 / 142
Event Log
The Event Log page shows the VPN event log.
To access the
Event Log
page:
1
Click the
Router
menu tab.
2
Then click the
VPN
/
Event Log
submenu.
Figure 34 shows an example of the menu and Table 34 describes the items you can
select.
Figure 34. Example of Event Log Page
Table 34. Event Log Menu Option
Option
Description
Shows the local time mapping to a certain log event.
Time
Shows detailed information of a VPN event log.
Description
122
Page 123 / 142
14
Management Menu Options
The Management Menu lets you:
•
Configure Admin Account
•
Configure Remote Management
•
View Event Log
•
Run Diagnostics
•
Configure Backup and Restore Settings
Admin Account
This page allows you to configure access privileges.
To access the
VPN
/
Event Log:
1
Click the
Router
menu tab.
2
Then click the Management/Admin Account submenu
Figure 31 shows an example of the menu and Table 35 describes the items you can
select.
123
Page 124 / 142
Figure 35. Example of Admin Account Page
Table 35. Admin account Menu Option
Option
Description
Enter the existing security password. The password can be
found on the bottom label of the unit.
Old Password
Enter the new security password.
New Password
Re-Enter New
password
Re-enter (confirm) the new security password.
Note:
DO NOT restore factory defaults to any changes on this page.
Remote Management
This page allows you to configure remote access to this device via web browser.
To access the
Remote Management
page
1
Click the
Router
menu tab.
124
Page 125 / 142
2
Then click the Management/Remote Management submenu
Figure 31 shows an example of the menu and Table 36 describes the items you can
select.
Figure 36. Example of the Remote Management page
Table 36. Remote Management Menu Option
Option
Description
Select Enable to allow remote access to this device via web
browser.
Remote Management
SNMP Event Log
The SNMP Event Log page shows the content of SNMP event log.
To access the
SNMP Event Log
page:
1
Click the
Router
menu tab.
2
Then click the
Management
/
Event Log
submenu.
125
19216811.live