1. Home
  2. /
  3. Manuals
  4. /
  5. Zoom
  6. /
  7. 5354
  8. /
  9. 18
Page 86 / 143 Scroll up to view Page 81 - 85
86
Table 19. SysLog Server Event Format
Parameter
Description
MMM
The three-letter abbreviation for the month (e.g., JUN, JUL AUG,
etc.)
DD
The two-digit day of the month (e.g., 01, 02, 03, etc.)
HH:MM:SS
The time displayed as two-digit values for the hour, minute, and
second, respectively.
YYYY
The four-digit year.
HostIP
The IP address of Cable Modem/Router sending the SysLog event.
This is the LAN IP Address on the Basic - Setup page.
Protocol
Can be one of the following: “TCP”, “UDP”, “ICMP”, “IGMP” or
“OTHER”. In the case of “OTHER” the protocol type is displayed in
parentheses (). For ICMP packets, the ICMP type is displayed in
parentheses.
SourceIP
The IP address of the originator of the session/packet.
SourcePort
The source port at the originator.
DestIP
The IP address of the recipient of the session/packet.
DestPort
The destination port at the recipient.
EventText
A textual description of the event.
The format of SysLog messages for informational events is simplified:
MMM DD HH:MM:SS YYYY SYSLOG[0]: [Host HostIP] EventText
Page 87 / 143
87
The table below lists all events that can be sent to the SysLog server.
Table 20. SysLog Server Event and Meaning
Event Text
Meaning
ALLOW: Inbound access
request
An inbound request was made, and accepted, from a
public network client to use a service hosted on the firewall
or a client behind the firewall.
ALLOW: Outbound
access request
An outbound request was made, and accepted, from a
public client to use a service hosted on a public network
server.
DENY: Inbound or
outbound access request
A request to traverse the firewall by a public or private
client violated the security policy, and was blocked.
DENY: Firewall interface
access request
A request was made to the public or private firewall
interface by a public or private client that violated the
security policy, and was blocked.
FAILURE: User interface
login (Invalid username
or password)
An attempt was made to login to the user interface, and
access was denied because the username and/or
password was incorrect.
SUCCESS: User interface
login
An attempt was made to login to the user interface, and
access was allowed.
ALLOW: User interface
access [request]
An HTTP GET or POST request was made by an
authenticated user to the user interface.
DENY: Inbound or
outbound [internet attack
name] attack
A known internet attack was detected attempting to
traverse the firewall, and was blocked. Examples of known
internet attacks are Ping Of Death, Teardrop, WinNuke,
XmasTree, SYN Flood, etc.
DENY: Firewall interface
[internet attack name]
attack
A known internet attack directed at the firewall itself was
detected and blocked. Examples of known internet attacks
are Ping Of Death, Teardrop, WinNuke, XmasTree, SYN
Flood, etc.
Firewall Up
The public interface (WAN) connection is up, and the
firewall has begun to police traffic, or the firewall was
previously disabled, and the user has enabled it through
the user interface.
Remote config
Remote configuration management (via HTTP through the
Page 88 / 143
88
management enabled
[port#]
specified port # on the public interface) has been enabled
via the user interface.
Remote config
management disabled
Remote configuration management has been disabled via
the user interface.
Time Of Day established
The system established the current system time via the
DOCSIS cable modem registration process. The system
time is used by the firewall to timestamp events.
Public Network Interface
up (IP address x.x.x.x)
The firewall successfully obtained an IP address for the
public network (WAN) interface via DHCP. This process
takes place after the cable modem registration process
successfully completes.
Page 89 / 143
89
12
Parental Control Menu Options
The Parental Control Menu lets you:
Configure the rules for Internet access based on user or time period
Configure the rules to block certain Internet contents and certain web sites
View the event logs related to parental control
To set up Parental Control, you first set up Policies in the
Basic Setup
Menu. Next, you
assign a user name and password for each user on your network. Finally you apply the
Policies to individual users in the
User Setup
Menu. When you enable Parental Control,
each user must log on to view Internet content. The content a user may access will be
defined by the policy that you assigned to that user. A user profile may optionally be
applied to a specific computer, so that no login is required for users of that computer.
Basic
This Basic Setup page allows you to configure rules which block certain Internet content
and certain Web sites. An override password and access duration timer allows user
override of the content filter settings. When entered, these allow a user Internet access
without the constraint of the rules entered until the timer expires.
To access the Basic page:
1
Click
Parental Control
in the menu bar.
2
Then click the
Basic
submenu.
Figure 26 shows an example of the menu and Table 19 describes the items you can
select.
Note:
Always remember to click the
Apply
button to complete changes on this page.
Page 90 / 143
90
Figure 26. Example of Basic Page

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top