Page 41 / 115
Scroll up to view Page 36 - 40
41
Figure 5. Example of Connection Page
Security
The Security page allows you to configure access privileges and restore the Cable
Modem/Router to its factory defaults and allows you to disable routing and use the Cable
Modem/Router as a pure bridge modem.
To access the Security page, click
Status
in the menu bar and then click the
Security
submenu. Figure 6 shows an example of the menu and Table 3 describes the items you
can select.
Page 42 / 115
42
Figure 6. Example of Security Page
To restore the Cable Modem/Router to factory defaults:
1
In the Security submenu, select the
Yes
button next to
Restore Factory Defaults
.
2
Click
Apply
.
3
Click
OK
to reboot the Cable Modem/Router. The reboot is complete when the
POWER LED stops blinking.
4
If the Login screen doesn’t reappear, click the
Refresh
link to log back in to the
Configuration Manager.
Table 3. Security Menu Option
Option
Description
User Name
Enter the new User Name for the administrator.
Current Password
Enter the existing security password.
The password can be
found on the bottom label of the unit
New Password
Enter the new security password.
Re-Enter New
password
Re-enter (confirm) the new security password.
Reboot
Click the
Yes
button next to reboot, then click
Apply
to reboot
the router.
Mode
Click the
Bridge
button if you do not wish to use the 5352 as a
router.
Most users should not change this setting.
Note:
DO NOT restore factory defaults to any changes on this page.
Page 43 / 115
43
Diagnostics
Note:
Some software versions may not support this feature.
The Diagnostics page allows you to troubleshoot connectivity problems. Two utilities are
provided for troubleshooting network connectivity: Ping and Traceroute.
Ping allows you to check connectivity between the Cable Modem/Router and devices on
the LAN while Traceroute allows you to map the network path from the Cable
Modem/Router to a public host.
Selecting Traceroute from the drop-down Utility list will present alternate controls for the
Traceroute utility.
To access the Diagnostics page, click
Status
in the menu bar and then click the
Diagnostics
submenu. Figure 7 and Figure 8 show the examples of the menu and
Page 44 / 115
44
Table 4 describes the items you can select.
Figure 7. Example of Diagnostics - Ping Page
Page 45 / 115
45
Figure 8. Example of Diagnostics - Traceroute Page
To run either utility:
1
Select the utility from the Utility drop-down list.
2
Make any changes to the default parameters.
3
Select
Start Test
to begin. The window will automatically be refreshed as the results
are displayed in the Results table.
19216811.live