Page 51 / 62
Scroll up to view Page 46 - 50
•
SMTP Server IP and Port
Input the SMTP server IP and port; for example,
mail.your_url.com
or
192.168.1.100:26
. If you do not specify a port number, the port value will be
set to 25.
•
SMTP Username and Password
Input the SMTP Username and Password.
•
E-mail addresses
The email address of each
syslog
recipient.
•
E-mail subject
The subject of the email alert. This setting is optional.
The Dynamic DNS Page
You can use the
Dynamic DNS
page to define the
D
ynamic
D
omain
N
ame
S
ervice
(
DDNS
) that will host your server. For example, the
DDNS
could host your server when
you want to host a website on your network but you do not have a static IP. Your
DDNS provider keeps track of changes to your IP address and automatically routes
users trying to access your web site to the correct location
Note
: Before you enable
DDNS
, you must register an account with one of the
DDNS
servers listed in the
Provider
field.
Your DDNS provider will provide the
HostName
,
Username/E-mail
, and
Password/Key
that
you will enter into the fields on the
Dynamic DNS
page.
The QoS Rule Page
You can use the
Q
uality
o
f
S
ervice (
QoS)
Rule
page to provide different priorities to
different users or data flows, or to guarantee a certain level of performance.
Chapter 5: Using the Configuration Manager's Advanced Program
51
Downloaded from
www.Manualslib.com
manuals search engine
Page 52 / 62
•
QoS Control
Click the
Enable
checkbox to enable QoS.
•
Available Upstream bandwidth
Set the upstream speed. The best way to find your throughput is to use one
of the free speed tests widely available on the Web. Some examples of sites
with good speed tests are www.speedtest.net and
www.speakeasy.net/speedtest. When you now your actual upstream
throughput, enter it in this field. The value should be in kilobits per second
(Kbps).
•
Local: IP
Define the local IP address of packets.
•
Local: Ports
Define the local port of packets.
•
Remote: IP
Define the remote IP address of packets.
•
Remote: Ports
Define the remote port of packets.
•
QoS Priority
Select a value from the dropdown menu to define the priority level for the
local and remote settings. Packets will be serviced based upon the priority
level set. For critical applications, select
High
or
Normal
. For non-critical
applications, select
Low
.
High
is the default value.
•
Enable
Click the
Enable
checkbox to apply the settings.
52
3G Wireless-N Router User Guide
Downloaded from
www.Manualslib.com
manuals search engine
Page 53 / 62
•
Use Rule#
Select a rule from the dropdown menu to indicate when the policy applies.
(0)
Always
is the default value.
The SNMP Page
You can use the
S
imple
N
etwork
M
anagement
P
rotocol
(
SNMP
) page to set up the
capability to remotely manage a computer network by polling and setting terminal
values and monitoring network events.
•
Enable SNMP
Click the
Local
,
Remote
, or both checkboxes to enable the SNMP function.
Check
Local
if you want the router to respond to requests from the LAN.
Check
Remote
if you want the router to to respond to requests from the WAN.
•
Get Community
Set
Get
Community
to the
GetRequest
to which your device will respond.
•
Set Community
Set
Set Community
to the
SetRequest
that your device will accept.
•
IP 1, IP 2, IP 3, IP 4
Enter the IP address of your SNMP Management PCs. You must specify
where the router should send
SNMP Trap
messages.
•
SNMP Version
Select the
SNMP Version
that your SNMP Management software supports.
•
WAN Access IP Address
Enter the IP address for WAN access. The default value of
0.0.0.0
indicates
that every IP address can get some information about this device, using the
SNMP protocol.
Chapter 5: Using the Configuration Manager's Advanced Program
53
Downloaded from
www.Manualslib.com
manuals search engine
Page 54 / 62
The Routing Table Page
You can use the
Routing
Table
page to enable/disable both
Dynamic
and
Static
Routing
.
If routing is enabled, you can specify which physical interface address to use for
outgoing IP data grams. If you have more than one router and subnet, you will need to
define a routing table that lets packets find the proper routing path and allows different
subnets to communicate with each other.
•
Dynamic Routing
The
R
outing
I
nformation
P
rotocol (
RIP
) will exchange information about
destinations for computing routes throughout the network. Please select
RIPv2
only if you have different subnet in your network. Otherwise, please
select
RIPv1
if you need this protocol.
•
Static Routing
For static routing, you can specify up to eight routing rules. You can enter
the
Destination
IP address,
Subnet Mask
,
Gateway,
Hop
for each routing rule.
Click the
Enable
checkbox to activate the routing table entry.
The System Time Page
You can use the
System Time
page to set and synchronize your router with the local
time zone, the Time Server and your PC.
54
3G Wireless-N Router User Guide
Downloaded from
www.Manualslib.com
manuals search engine
Page 55 / 62
•
Time Zone
Select the local time zone from the dropdown menu.
•
Auto-Synchronization
Click the
Enable
checkbox to enable this function.
Select an item from the
Time Server
dropdown menu to specify the server
with which to synchronize. The default value is
Auto
.
•
Click
Sync with Time Server
to set
Date
and
Time
by NTP Protocol.
•
Click
Sync with my PC
to set
Date
and
Time
using your PC’s Date and Time
The Schedule Rule and Schedule Rule Setting Pages
You can use the
Schedule Rule
and
Schedule
Rule Setting
pages to define when services
will be turned on and off based on rules that you define.
1
On the
Schedule Rule
page, click the
Enable
checkbox to enable the scheduling rules,
which are defined on the
Schedule Rule Setting
page.
Chapter 5: Using the Configuration Manager's Advanced Program
55
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live