1. Home
    2. /
  2. Manuals
    3. /
  3. Zonet
    4. /
  4. ZSR4154WE
    5. /
  5. 11
Page 51 / 54 Scroll up to view Page 46 - 50
47
Specifications:
Standards
IEEE 802.11n (Draft 4.0), IEEE 802.11g, IEEE 802.11b
standards
OS
Windows 2000, XP, Vista; Linux
User interface
Easy to use user configuration software
Transmit distance
Indoor up to 100m ; Outdoor up to 400m
(limited to environment)
roaming
Support multipoint auto roaming and configuration;
Support wireless network environments auto detect.
LED
LAN 1-4/WAN/WLAN/WPS/SYS/POWER
Antenna type
One detachable antenna
Frequency range
2.4GHz ~ 2.4835GHZ
Radio data rate
11n: 150/130/117/104/78/52/39/26/13Mbps
65/58.5/52/39/26/19.5/13/6.5Mbps
11g: 54/48/36/24/18/12/9/6Mbps
11b: 11/5.5/2/1Mbps
Modulation
OFDM, CCK, BPSK, QPSK
Spectrum Spread Technology
DSSS
Transmit output power
11n 20MHz/40MHz: -65dBm
54Mbps: -72dBm
11Mbps: -88dBm
Antenna Gain
3dBi
Power
9V 1A
Max. Consumption
6W
Flash
4M Bytes
System Memory
32M Bytes
MAC Address Entry
1K
Channels
11 Channels (USA, Canada) ; 13 Channels (Europe)
Media Access Protocol
WMM
Data security
WPA/WPA2; 64/128-bit WEP; TKIP/AES
Operation Temp.
0ºC ~ 40ºC
Storage Temp.
-20ºC ~ 70ºC
Operation Humidity
10%~90% RH no condensing
Operation Humidity
5%~90% RH no condensing
Dimension (L x W x H)
160mm x 102mm x 33mm
Weight
205g
Page 52 / 54
48
Appendix 2: Troubleshooting
Q1. I Can not login to the Web interface of ZSR4154WE after entering
the IP address in the address field
？
Step 1: check ZSR4154WE if it works well. Once the device is powered on for a
few seconds, the SYS indicator on the panel will be turned on. If it is not,
please contact us.
Step 2: check the network cable if it is work and the corresponding indicator is
“Always ON”. Sometimes, the indicator is “Always ON”, but it does not
mean it gets through.
Step 3: Run “Ping” command and check if it can ping ZSR4154WE’s LAN IP
address 192.168.0.1. If it is OK, please make sure your browser does
not access the Internet by proxy server. If the ping fails, you can press
the “RESET” button for 7 seconds to restore to default settings. And
then repeat the ping operation. If it still does not work, please contact
us.
Q2. I forget the login password and can not enter the setting page.
What can I do?
Press the “RESET” button for 7 seconds to restore ZSR4154WE to default
settings.
Q3. The computer connected with ZSR4154WE shows IP address
conflict. What can I do?
Check if there are other DHCP servers in the LAN. If there have, disable them.
The default IP address of ZSR4154WE is 192.168.0.1 and please maker sure
the address is not occupied by other devices. If there are two computers with
the same IP addresses, please modify one.
Q4. I can not use E-mail and access the Internet. What can I do?
It happens in ADSL connection and Dynamic IP users. And you need modify the
default MTU value (1492). Please in the “WAN Setting” modify the MTU value
with the recommended value as 1450 or 1400.
Page 53 / 54
49
Q5. How to configure and access the Internet via Dynamic IP?
In Setup Wizard of the Web utility interface, select “Dynamic IP” connection
type and click “Save” to activate it. As some ISPs bind the user computer’s MAC
address, you need to clone ZSR4154WE’s WAN MAC address to the binding PC’s
MAC address. Select “MAC Address Clone” in “Advanced Setting” to input your
computer’s MAC address and click “Apply” to activate it.
Q6. How to share my computer’s source with other users in Internet?
If you want Internet users to access the internal server via ZSR4154WE such as
e-mail server, Web, FTP, you can configure the “Virtual Server” to come true.
Step 1: create your internal server, make sure the LAN users can access these
servers and know related service port. For example, Web server’s port
is 80; FTP is 21; SMTP is 25 and POP3 is 110.
Step 2: in the Router’s web click “Virtual Server” and select “Single Port
Forwarding”.
Step 3: input the external service port given by the Router, for example, 80.
Step 4: input the internal Web service port, for example, 80.
Step 5: Input the internal server’s IP address. If your Web server’s IP address is
192.168.0.10, please input it.
Step 6: select the communication protocol used by your internal host: TCP, UDP,
ICMP.
Step 7: click “Apply” to activate the settings.
Q7. How to connect Xbox360 and PlayStation to ZSR4134WE?
You must obtain a Static IP address from your ISP. Follow the instruction in the
CD ROM filename
Xbox360.pdf
and setup your game console properly.
After
you have successfully configured your game console, you have to open ports
from the ZSR4154WE to allow two way communications.
For more information
on port forwarding instruction, please refer this user manual to Chapter 8.
Page 54 / 54
50
The following table has listed the well-known application and service port:
Server
Protocol
Service Port
WEB Server
TCP
80
FTP Server
TCP
21
Telnet
TCP
23
NetMeeting
TCP
1503
、
1720
MSN Messenger
TCP/UDP
File
Send:6891-6900(TCP)
Voice:1863
、
6901(TCP)
Voice:1863
、
5190(UDP)
PPTP VPN
TCP
1723
Iphone5.0
TCP
22555
SMTP
TCP
25
POP3
TCP
110

Rate

4.5 / 5 based on 2 votes.

Popular Zonet Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top