Page 26 / 58
Scroll up to view Page 21 - 25
zNID 24xx Series
26
zNID Hardware Installation Guide
POTS (Voice) Support
•
SIP (RFC 3261)
•
SIP-PLAR
•
MGCP
•
5 REN per line, balanced Ring at 60V RMS, DTMF dialing
•
Multiple voice codec: G.711 (u/a-law), G.726, G.729 (A and B)
•
Echo Canceling, Voice Activity Detection (VAD), Comfort Noise Insertion (CNI)
•
Various CLASS services — Caller ID, Call Waiting, Call Forwarding, Call
Transfer, etc.
•
T.30 and T.38 Fax
•
G.711 fallback for FAX
•
Pulse metering
Wireless (WiFi) Support
•
2x2 MIMO
•
Antenna: 5dBi
•
25dBM EIRP (316mW) Maximum Tx Power
•
max number of subscribers: 16 per SSID
•
SSID support: 4
•
1:1 mapping of SSIDs to VLANs
•
WEP, WPA-PSK, WPA2-PSK (AES, TKIP)
•
802.1x
•
64 bit and 128 bit WEP support
•
MAC address filtering
•
DDNS
IPTV
•
IGMP multicast
•
IGMP snooping
Management
•
Zhone Management System
–
EZ Touch
–
CPE Manager
•
OMCI
•
Web UI
•
Command Line Interface
•
SNMP
Table 2:
zNID 24xx common specifications (Continued)
Specifications
Values
Page 27 / 58
zNID 24xx models
zNID Hardware Installation Guide
27
Regulatory Compliance
•
CE
•
UL
•
FCC Part B
Table 2:
zNID 24xx common specifications (Continued)
Specifications
Values
Page 28 / 58
zNID 24xx Series
28
zNID Hardware Installation Guide
zNID 24xx series dimensions
Figure 5:
zNID 24xx dimensions
Figure 6:
zNID fiber tray dimensions
Page 29 / 58
zNID 24xx series LEDs
zNID Hardware Installation Guide
29
zNID 24xx series LEDs
The LEDs vary depending on the model of zNID. See
zNID 24xx models
on
page 22
for a complete list of zNID models.
GPON
Figure 7:
zNID-GPON-24xx LEDS
Table 3:
zNID-GPON-24xx LEDs
LED Name
Color
Indicates
STATUS
Green: Heartbeat
(1 short blink every
5 seconds)
Normal Operation
Green: Rapid blink
(10/sec)
Unit has been reset to Factory
Defaults / is unconfigured
Green: Alternating
fast blinking and
Off (1 second rapid
blink/1 second off)
EZ Touch communications in process
Green: Slow blink
(1/second)
Remote Mgt Access (OMCI, SNMP,
HTTP, Telnet, or TR-069)
Green: On
Reboot or restart in process
Off
Power off
BATT
Yellow: On
Operating on Battery Power
Yellow: Slow blink
(1/sec)
Battery Alarm (Low Battery, Missing,
or Replace)
Off
Normal operation on AC power
ALARM
Red: On
Running on battery
Red: 50% cycle:
1
sec Rapid Blink/
1 sec Off
EZ Touch actions pending -- SW or
Config update required
Off
Normal operation on AC power
Page 30 / 58
zNID 24xx Series
30
zNID Hardware Installation Guide
WAN
Green: On
Ranged successfully
Green: Slow blink
(1/sec)
Ranging in progress
Off
Not ready for ranging or not
provisioned
CONFIG
Green: On
OMCI provisioning is complete
Green: Rapid blink
(10/sec)
OMCI provisioning is written to
FLASH
Green: Slow blink
(1/sec)
OMCI provisioning is in progress
Off
No OMCI provisioning
GE1 – GE4
Green: On
Ethernet interface link
Green: Flash
Data transmitting
Off
No link on Ethernet interface
VOICE
Green: On
Registered successfully
Green: Slow blink
(1/sec)
Off hook
Off
Registration failed or telephone
service is not provisioned
USB
Green: On
Connected
Off
No power/USB not connected
WIFI
Green: On
WIFI enabled
Green: Flash
Data transmitting
Off
WIFI disabled
WPS
Green: Long flash
Success
Green: Flash
In progress
Off
WPS disabled
VIDEO
Green: On
1550nm signal is normal and RF
video output is enabled
Green: Slow blink
(1/sec)
RF video output is enabled, but no
1550nm signal received
Off
RF video output is disabled
Table 3:
zNID-GPON-24xx LEDs
LED Name
Color
Indicates
19216811.live