Page 56 / 145
Scroll up to view Page 51 - 55
65xx-A1 Family Router Users Guide
56
The
Add IP Filter -- Outgoing
screen will appear. Add the filter name, source information (from
the LAN side), and destination information (from the WAN side). Then click
Save / Apply
.
When you
Save / Apply
the IP filter, the
Outgoing IP Filtering Setup
screen appears. The
Outgoing IP Filtering Setup
screen lists the outgoing IP filters, including filters which were
added from the previous screen.
You can view, add or delete outgoing filters. The
Remove
button appears only when you have an
existing IP filter already set up.
IP Filtering—Incoming
Incoming IP filter filters the WAN traffic to the LAN side. Click
Add
to add incoming filter settings.
Page 57 / 145
65xx-A1 Family Router Users Guide
57
Enter a filter name, information about the source address (from the WAN side), and information
about the destination address (to the LAN side). Select the protocol and WAN interface to apply
the filter to, then click
Save/Apply
to add the setting.
You can view and delete the incoming filter settings in the
Add Ip Filter -- Incoming
screen.
-
Page 58 / 145
65xx-A1 Family Router Users Guide
58
When you
Save / Apply
the IP filter, the
Incoming IP Filtering Setup
screen appears. The
Incoming IP Filtering Setup
screen lists the incoming IP filters, including filters which were
added from the previous screen.
You can view, add or delete incoming filters. The
Remove
button appears only when you have an
existing IP filter already set up.
Page 59 / 145
65xx-A1 Family Router Users Guide
59
MAC Filtering
MAC filtering can forward or block traffic by MAC address. You can change the policy or add
settings to the MAC filtering table in the
MAC Filtering Setup
screen.
To add a setting to the MAC filtering table, then click
Add
to access the
Add MAC Filter
screen,
then configure the MAC filter.
•
Protocol type
: Type of protocol to filter.
•
PPPoE
•
IPv4
•
IPv6
•
AppleTalk
•
IPX
•
NetBEUI
•
IGMP
•
Destination MAC Address
: the destination MAC address you want to filter
•
Source MAC Address
: define the source MAC address
•
Frame Direction
: You can define the direction of the filter.
Options are
•
LAN TO WAN and WAN TO LAN
•
WAN to LAN
•
LAN to WAN
Page 60 / 145
65xx-A1 Family Router Users Guide
60
•
WAN Interfaces
: defines the WAN interface for this filter.
This drop down list will show all
the available WAN interfaces.
Click
Save/Apply
to save the MAC filter.
When you
Save / Apply
the IP filter, the
MAC Filtering Setup
screen appears. The
MAC
Filtering Setup
screen lists the MAC filters, including filters which were added from the previous
screen.
You can view, add or delete MAC filters. The
Remove
button appears only when you have an
existing IP filter already set up.
19216811.live