Page 86 / 107
Scroll up to view Page 81 - 85
Diagnostics
The diagnostics screen allows you to run diagnostic tests to check your DSL connection. The
outcome will show test results of three connections—
•
Connection to your local network
•
Connection to your DSL service provider
•
Connection to your Internet service provider
There are two buttons at the bottom of the page—
Test
and
Test with OAM F4
—which allow you
to retest if necessary.
6219-X1 Router Users Guide
86
Downloaded from
www.Manualslib.com
manuals search engine
Page 87 / 107
Management
The Management section gives you access to certain setups for the purpose of maintaining the
system, including backing up the configurations, viewing system log, maintaining access control,
updating software, etc.
Settings
The page options under Settings provide you with the ability to save configurations to a file,
restore configurations from a file and to restore the factory default configuration.
Backup Settings
To save a copy of the configurations that you have made on your router:
1.
From the Settings – Backup page click
Backup Settings
.
The below pop-up screen will appear with a prompt to open or save the file to your
computer.
2.
Click
Save
.
6219-X1 Router Users Guide
87
Downloaded from
www.Manualslib.com
manuals search engine
Page 88 / 107
Update or Restore User Settings
To load a previously saved configuration file onto your router:
1.
From the
Settings – Update Settings
page, click
Browse
to find the file on your computer.
2.
Click
Update Settings
.
The router will restore settings and reboot to activate the restored settings.
Restore Default
Restore Default will delete all current settings and restore the router to factory default settings.
To restore the factory defaults:
1.
From the
Settings – Restore Default Settings
page click
Restore Default Settings
.
6219-X1 Router Users Guide
88
Downloaded from
www.Manualslib.com
manuals search engine
Page 89 / 107
2.
Click
OK
when the pop-up window appears confirming that you want to restore factory
default settings to your router.
The router will restore the default settings and reboot.
System Log
The System Log dialog allows you to view the System Log and configure the System Log options.
To view the System Log
click
View System Log
to check the log file.
The
System Log
page shows the date and time of the recorded event, which facility captured the
event, the severity of the event and a message which describes the event.
6219-X1 Router Users Guide
89
Downloaded from
www.Manualslib.com
manuals search engine
Page 90 / 107
Configure System Log
If the log is enabled, the system will log selected events based on their level. The log levels are
•
Emergency
•
Alert
•
Critical
•
Error
•
Warning
•
Notice
•
Informational
•
Debugging.
All events above or equal to the selected log level will be logged and displayed.
If the selected mode is
Remote
or
Both
, events will be sent to the specified IP address and UDP
port of a remote system log server.
If the selected mode is
Local
or
Both
, events will be recorded in the local memory.
Select the desired values and click
Save/Apply
button to configure the system log.
6219-X1 Router Users Guide
90
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live