Diagnostics

The diagnostics screen allows you to run diagnostic tests to check your DSL connection. The

outcome will show test results of three connections—

•

Connection to your local network

•

Connection to your DSL service provider

•

Connection to your Internet service provider

There are two buttons at the bottom of the page—

Test

and

Test with OAM F4

—which allow you

to retest if necessary.

6219-X1 Router Users Guide

86

Downloaded from

www.Manualslib.com

manuals search engine

Management

The Management section gives you access to certain setups for the purpose of maintaining the

system, including backing up the configurations, viewing system log, maintaining access control,

updating software, etc.

Settings

The page options under Settings provide you with the ability to save configurations to a file,

restore configurations from a file and to restore the factory default configuration.

Backup Settings

To save a copy of the configurations that you have made on your router:

1.

From the Settings – Backup page click

Backup Settings

.

The below pop-up screen will appear with a prompt to open or save the file to your

computer.

2.

Click

Save

.

6219-X1 Router Users Guide

87

Downloaded from

www.Manualslib.com

manuals search engine

Update or Restore User Settings

To load a previously saved configuration file onto your router:

1.

From the

Settings – Update Settings

page, click

Browse

to find the file on your computer.

2.

Click

Update Settings

.

The router will restore settings and reboot to activate the restored settings.

Restore Default

Restore Default will delete all current settings and restore the router to factory default settings.

To restore the factory defaults:

1.

From the

Settings – Restore Default Settings

page click

Restore Default Settings

.

6219-X1 Router Users Guide

88

Downloaded from

www.Manualslib.com

manuals search engine

2.

Click

OK

when the pop-up window appears confirming that you want to restore factory

default settings to your router.

The router will restore the default settings and reboot.

System Log

The System Log dialog allows you to view the System Log and configure the System Log options.

To view the System Log

click

View System Log

to check the log file.

The

System Log

page shows the date and time of the recorded event, which facility captured the

event, the severity of the event and a message which describes the event.

6219-X1 Router Users Guide

89

Downloaded from

www.Manualslib.com

manuals search engine

Configure System Log

If the log is enabled, the system will log selected events based on their level. The log levels are

•

Emergency

•

Alert

•

Critical

•

Error

•

Warning

•

Notice

•

Informational

•

Debugging.

All events above or equal to the selected log level will be logged and displayed.

If the selected mode is

Remote

or

Both

, events will be sent to the specified IP address and UDP

port of a remote system log server.

If the selected mode is

Local

or

Both

, events will be recorded in the local memory.

Select the desired values and click

Save/Apply

button to configure the system log.

6219-X1 Router Users Guide

90

Downloaded from

www.Manualslib.com

manuals search engine