4.

Click

Save

to save the settings.

After the settings are saved, the below screen will follow displaying the WAN settings that

you made with the option to

Add

or

Remove

any of the connections that you have made.

Remove Function

If you want to delete a connection from the listed WAN setup, click the

Remove

check box next to

the item, then click

Remove

.

6219-X1 Router Users Guide

46

Downloaded from

www.Manualslib.com

manuals search engine

Finish Function

When satisfied with the settings click

Finish

.

After selecting the

Finish

button, the

DSL Router Reboot

screen will appear. At this point, the

router will reboot to save the changes made.

6219-X1 Router Users Guide

47

Downloaded from

www.Manualslib.com

manuals search engine

LAN Local Area Network (LAN) Setup

You can configure the DSL Router IP address and Subnet Mask for the LAN interface to

correspond to your LAN’s IP Subnet. If you want the DHCP server to automatically assign IP

addresses, then enable the DHCP server and enter the range of IP addresses that the DHCP

server can assign to your computers. Disable the DHCP server if you would like to manually

assign IP addresses.

The

Save

button only saves the LAN configuration data, but does not apply the configurations.

Select the

Save/Reboot

button to save the LAN configuration data and reboot the router and

apply the new configurations.

6219-X1 Router Users Guide

48

Downloaded from

www.Manualslib.com

manuals search engine

The following DSL Router Reboot screen appears after

Save / Reboot

is clicked.

6219-X1 Router Users Guide

49

Downloaded from

www.Manualslib.com

manuals search engine

Ethernet Mode

Ethernet mode allows you to select the speed of your Ethernet connection.

Modes include—auto,

100 full, 100 half, 10 full and 10 half.

If you select

auto

then the router will use the common

mode with which all the connected interfaces can operate.

6219-X1 Router Users Guide

50

Downloaded from

www.Manualslib.com

manuals search engine