1. Home
    2. /
  2. Manuals
    3. /
  3. Zhone
    4. /
  4. 1518-A1
    5. /
  5. 7
Page 31 / 117 Scroll up to view Page 26 - 30
15xx-A1 Family Router Users Guide
31
2.
Specify VPI and VCI as directed by your ISP.
3.
Select the
Encapsulation Mode
as directed by your ISP.
4.
Under
WAN Service Configuration
select the protocol for the WAN connection from the
Protocol
dropdown as directed by your ISP.
Depending on the protocol selected further parameters are presented. For example, if you
selected PPPoE or PPPoA, the PPP Username and Password option appears.
PPPoE
and
PPPoA
: You will need to enter the PPP username and password as provided
by your ISP.
Page 32 / 117
15xx-A1 Family Router Users Guide
32
For PPPoE, if desired, the DSL Router can be configured with a static IP address and
Subnet Mask for the LAN interface to correspond to your LAN‘s IP Subnet.
To use a
static IP address check the Use Static IP Address option, then enter the
IP Address
,
Subnet Mask
, Default
Gateway
and
DNS
server.
Page 33 / 117
15xx-A1 Family Router Users Guide
33
IPoA:
For IPoA your ISP will supply information for
IP Address
,
Subnet Mask
, Default
Gateway
and
DNS
server.
DHCP
: With DHCP you need not set any other options.
Page 34 / 117
15xx-A1 Family Router Users Guide
34
Bridge
: With the Bridge option you do not set any other options.
5.
With Quick Setup the router’s wireless option is automatically set up and you will need to
enter the SSID.
6.
Click
Apply/Save
to save your settings.
7.
Upon completion the summary page will be displayed.
Page 35 / 117
15xx-A1 Family Router Users Guide
35
Chapter 5
Advanced Setup
This section contains advanced setup settings. To create a connection you need to define the
Layer 2 interface and the WAN service.
Configuration Types
ADSL is an ATM based technology. The 15xx family of routers support Bridging and Ethernet
over ATM (EoA) configurations and ATM based configurations:
Bridging
Bridging (Layer 2 MAC addressing); uses Ethernet frames.
PPPoE
Point to Point Protocol over Ethernet; encapsulates PPP packet in Ethernet. (RFC 2516)
IPoE
IP over Ethernet (Layer 3 Internet Protocol addressing in Ethernet frames)
PPPoA
Point to Point Protocol over ATM, encapsulates PPP frames in ATM adaption layer 5 (AAL5)
packets.
IPoA
IP over ATM (Layer 3 Internet Protocol addressing in AAL5 packets
To configure a connection, you first configure the connection type. EoA, PPPoA, or IPoA.
1.
Add a Layer 2 interface and select the connection type.
EoA is used for PPPoE, IPoE and Bridge connections. PPPoA and IPoA are AAL5 based
connections
2.
Set the WAN interface
The WAN interface options to select are determined by the Layer 2 interface type.
Add a Layer 2 Interface
1.
In the left hand menu pane, click
Advanced Setup
.
2.
Under Advanced Setup, click Layer2 Interface then ATM Interface, then click the
Add
button.
3.
In the
VPI
and
VCI
text boxes enter appropriate VPI/VCI numbers.
VPI/VCI (Virtual Path Identifier/Virtual Circuit Identifier) values essentially define the ―pipe‖
which sends data from the upstream device to the modem/router. The VPI/VCI values will be
given to you by your ISP.
4.
Under
Select DSL Link
Type
select the appropriate DSL link type:

Rate

3.5 / 5 based on 2 votes.

Popular Zhone Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top