Page 21 / 126 Scroll up to view Page 16 - 20
030-300613 Rev A
21
August 2009
User Guide
VersaLink Wireless Gateway (Model 7500)
6.3
Installing the USB Driver for Windows Vista™
To install the USB driver for Windows Vista™, please follow these steps:
IMPORTANT:
Confirm that the CD-ROM provided with the Gateway kit is inserted into the PC’s CD-ROM drive
before beginning this installation.
1.
Windows Vista™:
After you connect the Gateway to your PC, the following
Found New Hardware
screen
will appear (Figure 10). Click
Next
.
Figure 10.
Windows Vista
2.
Windows Vista™
: The window below confirms that the PC has finished loading the drivers (Figure 11). Click
Close
.
Figure 11.
Windows Vista
Congratulations! You have completed the software installation for the USB drivers. Now return to section 5.3.3,
“Connecting USB Devices to Your Gateway,” to complete the hardware installation instructions.
Page 22 / 126
030-300613 Rev A
22
August 2009
User Guide
VersaLink Wireless Gateway (Model 7500)
7.
ACCESSING YOUR GATEWAY
7.1
Logging on to Your Gateway
This section explains the logon procedures for your Gateway. These procedures should be used any time you want to
access or make changes to your Gateway’s configurations or firewall settings.
IMPORTANT:
Your Gateway is capable of automatically sensing protocol type (DHCP or PPPoE). This process is
designed to start after you have connected your Gateway to your network. To access your Gateway’s Web pages,
your PC must be configured for DHCP. Refer to your Windows help screen for information on configuring your
computer for DHCP. At your PC, click
Start
, then
Help
to access the Windows help screen.
Your ISP determines the type of protocol you will use to connect to the Internet. Routed IP allows you to connect to
your ISP equipment without first having to identify yourself (authenticate) with your ISP. PPPoE requires that you
authenticate (type an account ID and password) before obtaining an Internet connection. After automatic protocol
detection starts, the Gateway will determine which protocol you will use for your Internet connection.
To log on to your Gateway, start your Web browser, and type the following IP address in the browser’s address bar:
After you have typed the URL address, press
Enter
on your keyboard. If your Gateway has the Automatic PVC
Detection feature enabled (optional), you will see this screen while the Gateway detects and configures the WAN
connection.
The detection process will then begin as shown in the following screen.
Once the detection process is complete, you will see the following screen.
Page 23 / 126
030-300613 Rev A
23
August 2009
User Guide
VersaLink Wireless Gateway (Model 7500)
7.1.1
Connecting to the Internet via Routed IP Protocol
If Automatic WAN Protocol Detection finds that your ISP’s server is DHCP, the ISP’s DHCP server will send your
Gateway a WAN IP address. A WAN IP address indicates that you have established a connection with your ISP.
Routed IP allows you to connect to your ISP equipment without first having to identify yourself (authenticate) with
your ISP. Once your Gateway has obtained a WAN IP address, you do not need to configure any additional settings
Congratulations! You have completed the Gateway’s Automatic WAN Protocol Detection process. Now, go to
section 7.4, “Confirming Your Internet Connection,” to confirm your Internet connection.
NOTE:
If you want to modify your Routed IP settings, go to section 14.4.3, “VersaPort.” The Gateway’s factory
default protocol is Routed IP.
7.1.2
Connecting to the Internet via PPPoE Protocol
Some ISPs require that you identify yourself using PPP (Point-to-Point Protocol) authentication before obtaining an
Internet connection. To connect to the Internet for the first time via PPP, go to one of the following sections:
Section 7.2, “Configuring Your Internet Connection Using the Installation Wizard,” for details on
connecting to the Internet using the Gateway’s built-in Installation Wizard. Use this method for simple,
less-detailed configuration process.
Section 7.3, “Configuring Your Internet Connection Manually,” for details on connecting to the Internet
using a manually set up connection. Use this method for a more detailed configuration process.
7.2
Configuring Your Internet Connection Using the Installation Wizard
To connect to the Internet using the Gateway’s built-in Installation Wizard, please follow these steps:
1.
Click the
Add/Edit Connection
link in the
Broadband Connection
panel of the
Home
screen. The
Getting
Started
window will appear.
Page 24 / 126
030-300613 Rev A
24
August 2009
User Guide
VersaLink Wireless Gateway (Model 7500)
2.
Click
next
. The
User Name
window will appear, requesting information that will allow the Gateway to make a
connection to your ISP. This information is stored in your Gateway.
3.
Type in the following information in the fields provided:
Connection Name: This is a description of the default connection profile that your Gateway will use.
You may use the default or assign a new description.
Account ID: This is supplied by your ISP. This is a text string which uniquely identifies you with your
ISP.
Account Password: This is supplied by your ISP. This is a key phrase or text string that verifies your
identity to the ISP.
Page 25 / 126
030-300613 Rev A
25
August 2009
User Guide
VersaLink Wireless Gateway (Model 7500)
4.
Click
next
. The
VPI/VCI
window will appear, requesting information that will allow the Gateway to establish a
communications channel to the ISP.
5.
Type in the following information in the fields provided:
VPI (0-255): This is Virtual Path Indicator. This value is supplied by your ISP.
VCI (32-65535): This is the Virtual Channel Indicator. This value is supplied by your ISP.
6.
Click
next
. The
PROTOCOL
window appears, requesting a networking protocol to use when communicating
with the ISP.
7.
Click the drop-down menu to select a protocol:
PPPoA
,
PPoE
, or
Bridge
. This information is provided by your
ISP.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top