Page 121 / 126 Scroll up to view Page 116 - 120
030-300613 Rev A
121
August 2009
User Guide
VersaLink Wireless Gateway (Model 7500)
Selection box
Displays the devices available to share the Single Static IP address the ISP has
assigned the Gateway. The names listed in the select box will be populated by the
Gateway’s DHCP server based on DHCP requests. If a device’s name cannot be
determined, the current IP address of the device will be placed in the list.
When the feature is enabled, the active machine will be highlighted in the
select box and displayed at the bottom of the screen with the
Disable
button.
When the feature is disabled, no device in the select box will be
highlighted, and the
Enable
button will be available.
When
User Configured PC
is selected, a local PC must be configured
manually with the WAN IP address as its Ethernet adapter’s IP address.
To enable Single Static IP, select a device that will share your Single Static IP from the options listed in the
selection box, click
Enable
and then
OK
. Your Gateway will be reset, and the new configuration will take effect.
After a brief delay, the
Home
screen will appear. Confirm that you have a DSL sync and that your PPP session
displays UP.
(If necessary, click
connect
in the
Home > Connection Overview
screen to establish a PPP session.)
Select
Advanced > Single Static IP
to confirm that Single Static IP has been enabled, as shown in the following
screen.
IMPORTANT:
After you enable Single Static IP, reboot your computer to allow the changes to take effect.
NOTE:
If you chose to enable
User Configured PC,
wait for the Gateway to reset, and then manually type the
WAN IP, Gateway, and Subnet mask addresses you obtained from your ISP into a PC.
To disable Single Static IP, select a device that will share your Single Static IP from the options listed in the
window, click
Disable
and then
OK
. Your Gateway will be reset, and the new configuration will take effect.
Page 122 / 126
030-300613 Rev A
122
August 2009
User Guide
VersaLink Wireless Gateway (Model 7500)
After a brief delay, the
Home
screen will appear. Confirm that you have a DSL sync and that your PPP session
displays UP.
(If necessary, click
connect
in the
Home > Connection Overview
screen to establish a PPP session.)
Select
Advanced > Single Static IP
to confirm that Single Static IP has been disabled.
14.6
Restart
The following screen will appear if you select
Advanced > Restart
from the main menu. This screen is used for
performing a device restart while retaining the device’s current configuration settings. Clicking the
restart
button is
functionally equivalent to physically turning the power off and on to the device. Restarting may be useful for
recovering from situations where the device is performing abnormally.
After you click
Restart
, please wait a brief moment while the Gateway is restarting. Refer to section 14.2.1,
“Backup/Restore,” for related information on backing up and restoring your Gateway.
NOTE:
If you reset the Gateway to factory default settings, you will need to log in to the Gateway again to access the
Gateway’s Web pages and establish your Internet connection as explained in section 7, “Accessing Your Gateway.”
Page 123 / 126
030-300613 Rev A
123
August 2009
User Guide
VersaLink Wireless Gateway (Model 7500)
15.
TECHNICAL SUPPORT INFORMATION
Contact your Internet service provider for technical support.
16.
PRODUCT SPECIFICATIONS
System Requirements for 10/100 Base-T/Ethernet
Pentium
®
or equivalent class machines or
higher
Microsoft
®
Windows
®
(Vista™, XP,
2000) Macintosh
®
OS X, or Linux
installed
64 MB RAM (128 MB recommended)
10 MB of free hard drive space
10/100 Base-T Network Interface Card
(NIC)
Internet Explorer 5.5 or higher or
Netscape Navigator 7.x or higher
Computer Operating System CD-ROM
System Requirements for USB
Pentium
®
or equivalent class machines or
higher
Microsoft
®
Windows
®
(Vista™, XP,
2000) installed
64 MB RAM (128 MB recommended)
10 MB of free hard drive space
USB Version 1.1 or higher compliant bus
Internet Explorer 5.5 or higher or
Netscape Navigator 7.x or higher
Computer operating system CD-ROM
System Requirements for Wireless
Pentium
®
or equivalent class machines or
higher
Microsoft
®
Windows
®
(Vista™, XP,
2000) installed
64 MB RAM (128 MB recommended)
10 MB of free hard drive space
USB Version 1.1 or higher compliant bus
Internet Explorer 5.5 or higher or
Netscape Navigator 7.x or higher
Computer operating system CD-ROM
IEEE 802.11b/g PC adapter
LEDs
Power
E1, E2, E3, E4
Wireless
USB
DSL
Internet
Connectors
DSL: 6-pin RJ-11 modular jack-DSL
Ethernet: 8-pin RJ-45 modular jack
Power:
Barrel connector
Power
Power Supply: External 120 VAC (10%) to
12 VDC wall-mount power supply, small
form factor
Energy Star® qualified
Power Consumption: Less than 8 watts
typical, from 120 VAC
Dimensions
Height: 1.3 in. (3.30 cm)
Width: 7.0 in (17.78 cm)
Depth: 4.9 in. (12.44 cm)
Weight
Approx. 1 lb (0.45 kg)
Environmental
Ambient Operating Temperature:
+32 to
+104 °F (0 to +40 °C)
Relative Humidity:
5 to 95%, non-condensing
EMC/Safety/Regulatory Certifications
FCC Part 15, Class B
ANSI/UL Standard 60950-1
CAN/CSA Standard C22.2 No. 60950-01
First Edition dated
UL, CSA, ACTA 968-A-3
Industry Canada CS03
Page 124 / 126
030-300613 Rev A
124
August 2009
User Guide
VersaLink Wireless Gateway (Model 7500)
17.
SOFTWARE LICENSE AGREEMENT
READ THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT CAREFULLY. THIS
SOFTWARE IS COPYRIGHTED AND LICENSED (NOT SOLD). BY INSTALLING AND OPERATING
THIS PRODUCT, YOU ARE ACCEPTING AND AGREEING TO THE TERMS OF THIS LICENSE
AGREEMENT. IF YOU ARE NOT WILLING TO BE BOUND BY THE TERMS OF THIS LICENSE
AGREEMENT, YOU SHOULD PROMPTLY RETURN THE SOFTWARE AND HARDWARE TO
WESTELL TECHNOLOGIES, INC. THIS LICENSE AGREEMENT REPRESENTS THE ENTIRE
AGREEMENT CONCERNING THE SOFTWARE BETWEEN YOU AND WESTELL TECHNOLOGIES,
INC. (REFERRED TO AS "LICENSOR"), AND IT SUPERSEDES ANY PRIOR PROPOSAL,
REPRESENTATION, OR UNDERSTANDING BETWEEN THE PARTIES.
1. License Grant. Licensor hereby grants to you, and you accept, a nonexclusive license to install, execute and
otherwise use the Compact Disk (CD) and the computer programs contained therein in machine-readable,
object code form only (collectively referred to as the "SOFTWARE"), and the accompanying User
Documentation, only as authorized in this License Agreement. Unless otherwise indicated, SOFTWARE
excludes any “Third Party Software,” as defined below. The SOFTWARE may be used only in connection
with the computers or systems using the products for which the SOFTWARE is provided. You agree that you
will not assign, sublicense, transfer, pledge, lease, rent, or share your rights under this License Agreement,
except that you may transfer the SOFTWARE together with the product and the User’s Manual to any third
party if you uninstall the SOFTWARE from your system and transfer all copies of the SOFTWARE CD. You
agree that you may not nor allow others to reverse assemble, reverse compile, or otherwise translate the
SOFTWARE.You may retain the SOFTWARE CD for backup purposes only. In addition, you may make one
copy of the SOFTWARE in any storage medium for backup purposes only. You may make one copy of the
User's Manual for backup purposes only. Any such copies of the SOFTWARE or the User's Manual shall
include Licensor's copyright and other proprietary notices. Except as authorized under this paragraph, no
copies of the SOFTWARE or any portions thereof may be made by you or any person under your authority
or control.
2. Licensor's Rights. You acknowledge and agree that the SOFTWARE and the User's Manual are
proprietary products of Licensor protected under U.S. copyright law. You further acknowledge and agree
that all right, title, and interest in and to the SOFTWARE and the User’s Manual, including associated
intellectual property rights, are and shall remain with Licensor. This License Agreement does not convey to
you an interest in or to the SOFTWARE, but only a limited right of use revocable in accordance with the
terms of this License Agreement.
3.
License Fees. The fees paid by you for the accompanying product are paid in partial consideration of the
licenses granted to the SOFTWARE under this License Agreement.
4. Term. This License Agreement is effective upon your opening of this package and shall continue until
terminated. You may terminate this License Agreement at any time by returning the SOFTWARE and all
copies thereof and extracts therefrom to Licensor. Licensor may terminate this License Agreement upon the
breach by you of any term hereof. Upon such termination by Licensor, you agree to return to Licensor the
SOFTWARE and all copies and portions thereof.
5. Limitation of Liability. Licensor's cumulative liability to you or any other party for any loss or damages
resulting from any claims, demands, or actions arising out of or relating to this Agreement shall not exceed
the amounts paid to Licensor for the use of the SOFTWARE. In no event shall Licensor be liable for any
indirect, incidental, consequential, special, or exemplary damages or lost profits, even if Licensor has been
advised of the possibility of such damages. SOME STATES DO NOT ALLOW THE LIMITATION OR
EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
Page 125 / 126
030-300613 Rev A
125
August 2009
User Guide
VersaLink Wireless Gateway (Model 7500)
6. Governing Law. This License Agreement shall be construed and governed in accordance with the laws of
the State of Illinois. You agree to submit to, and do hereby submit to, the jurisdiction of the state and federal
courts of the state of Illinois and agree that venue is proper in those courts with regard to any litigation
arising under this Agreement.
7. Costs of Litigation. If any action is brought by either party to this License Agreement against the other
party regarding the subject matter hereof, the prevailing party shall be entitled to recover, in addition to any
other relief granted, reasonable attorney fees and expenses of litigation.
8. Severability. Should any term of this License Agreement be declared void or unenforceable by any court of
competent jurisdiction, such declaration shall have no effect on the remaining terms hereof.
9. No Waiver. The failure of either party to enforce any rights granted hereunder or to take action against the
other party in the event of any breach hereunder shall not be deemed a waiver by that party as to subsequent
enforcement of rights or subsequent actions in the event of future breaches.
10. Third Party Software. You acknowledge that the CD may also include third-party computer programs
and documentation (“Third Party Software”). Third Party Software, and your use of Third Party Software,
is subject the terms of the license agreement included with the programs. You acknowledge that Third Party
Software is provided to you as a convenience, and Licensor is not responsible for the content, quality or any
liability arising from your use of Third Party Software. To the fullest extent possible, Licensor shall transfer
to you all rights and warranties in the Third Party Software. In all other cases, Third Party Software is
provided “AS IS, WHERE IS” WITHOUT WARRANTY OF ANY KIND, AND ANY USE OF THE
SOFTWARE IS AT YOUR OWN RISK. TO THE FULLEST EXTENT PERMITTED BY LAW,
LICENSOR DISCLAIMS ALL LIABILITY WITH RESPECT TO THIRD PARTY SOFTWARE.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top