Page 201 / 210
Scroll up to view Page 196 - 200
030-300554 Rev. A
201
June 2008
Verizon FiOS Router (Model 9100EM)
User Guide
15.22.2
New Multicast Address
If you clicked the
New Multicast Address
link in the preceding screen, the following screen will appear. Enter
multicast address and then click
Apply
.
If you clicked
Apply
, the address will be displayed in the list of Multicast Addresses.
Page 202 / 210
030-300554 Rev. A
202
June 2008
Verizon FiOS Router (Model 9100EM)
User Guide
15.22.3
IGMP Status
If you click
Advanced
in the top navigation menu and then select the
IGMP Status
link, the following screen will
appear.
NOTE:
If IGMP proxy is not enabled, the IGMP Proxy Status panel will be empty.
15.23
PPPoE Relay
If you click
Advanced
in the top navigation menu and then select the
PPPoE Relay
link, the following screen will
appear. PPPoE Relay enables the Router to relay packets on PPPoE connections, while keeping its designated
functionality for any additional connections.
To activate PPPoE Relay, click the check box (check mark will appear in the box). Click
Apply
to save the settings.
Page 203 / 210
030-300554 Rev. A
203
June 2008
Verizon FiOS Router (Model 9100EM)
User Guide
15.24
IP Address Distribution
If you click
Advanced
in the top navigation menu and then select the
IP Address Distribution
link, the following
screen will appear.
Your Router's Dynamic Host Configuration Protocol (DHCP) server makes it possible to easily add computers that
are configured as DHCP clients to the home network. It provides a mechanism for allocating IP addresses and
delivering network configuration parameters to such hosts. The Router’s default DHCP server is the LAN bridge.
A client (host) sends out a broadcast message on the LAN requesting an IP address for itself. The DHCP server then
checks its list of available addresses and leases a local IP address to the host for a specific period of time and
simultaneously designates this IP address as “taken.” At this point the host is configured with an IP address for the
duration of the lease.
To configure the DHCP Sever settings, click the Network (Home/Office) link, the following screen will appear.
Enter the desired DHCP settings in the fields provided, and then click
Apply
to save the settings.
Page 204 / 210
030-300554 Rev. A
204
June 2008
Verizon FiOS Router (Model 9100EM)
User Guide
16.
SYSTEM MONITORING
16.1
Gateway Status
If you click
System Monitoring
in the top navigation menu, and then click Gateway Status in the left submenu, the
following screen will appear.
After you have finished viewing information about your Router, click
Close
.
Gateway Status
Software Version
Router’s software version.
Release Date
Router’s software release date.
Platform
Router manufacturer’s model name.
Model Number
Router manufacturer’s
model number.
INI File Name
Router’s INI file name.
INI File Version
Router’s INI file version.
Hardware Version
Router’s hardware version.
Hardware Serial Number
Router’s serial number.
Upgrade
Click this link to upgrade the Router’s firmware. Refer to section 15.20 for
details on this feature.
Page 205 / 210
030-300554 Rev. A
205
June 2008
Verizon FiOS Router (Model 9100EM)
User Guide
16.2
Gateway Status
If you click
System Monitoring
in the top navigation menu, and then click
Full Status/System wide Monitoring
of Connections
in the left submenu, the following screen will appear. This screen displays connection information
for devices connected to your Router. At this screen, you can do any of the following:
•
Turn off Automatic Refresh by clicking the
Automatic Refresh Off
button. When Automatic Refresh is
enabled, the screen will be updated automatically to display the most current statistics.
•
Manually refresh this screen by clicking the
Refresh
button.
•
Click the links in this screen to access the Router’s connection settings.
•
Click
Close
to return to the
Network Connections
screen.
verizonfios
19216811.live