Page 111 / 210
Scroll up to view Page 106 - 110
030-300554 Rev. A
111
June 2008
Verizon FiOS Router (Model 9100EM)
User Guide
13.5.1
Setting Up a User Defined Port Triggering Rule
To set up a user-defined port triggering rule, in the
Add
drop-down list, select
User Defined
.
13.5.1.1
Configuring Outgoing Trigger Ports
If you selected
User Defined
in the preceding screen, the following screen will appear. Enter the desired name in the
Service Name
field. Next, click the
New Trigger Ports
link to configure outgoing trigger ports.
Page 112 / 210
030-300554 Rev. A
112
June 2008
Verizon FiOS Router (Model 9100EM)
User Guide
If you clicked
New Trigger Ports,
the following screen will appear. Select the desired protocol from the
Protocol
drop-down list.
For example, if you selected
TCP
from the
Protocol
drop-down list, the following screen will appear. Select the
desired source and destination settings from the drop-down lists.
Page 113 / 210
030-300554 Rev. A
113
June 2008
Verizon FiOS Router (Model 9100EM)
User Guide
For example, if you selected
Single,
the following screen will appear. Enter the desired source port and destination
port values, and then click
OK
to save the settings.
If you entered source and destination port values clicked
OK
in the preceding screen, the following screen will
appear. If you desire to configure incoming trigger port, proceed to section 13.5.1.2. Otherwise, click
OK
to
continue.
Page 114 / 210
030-300554 Rev. A
114
June 2008
Verizon FiOS Router (Model 9100EM)
User Guide
If you clicked
OK
, the following screen will appear. Click
Apply
to save the settings. If you want to edit a rule,
click the pencil icon next to the rule that you want to edit. To delete a rule, click the “
X
” icon next to the rule that
you want to delete.
13.5.1.2
Configuring Incoming Trigger Ports
To configure incoming trigger ports, in the
Edit Port Triggering Rule
screen, click the
New Opened Ports
link.
Page 115 / 210
030-300554 Rev. A
115
June 2008
Verizon FiOS Router (Model 9100EM)
User Guide
If you clicked
New Opened Ports,
the following screen will appear. Select a protocol from the
Protocol
drop-down
list.
For example, if you select
UDP
, the following screen will appear. Select the desired source port and destination port
settings from the drop-down lists.
19216811.live