1. Home
    2. /
  2. Manuals
    3. /
  3. Westell
    4. /
  4. A90-750045-07
    5. /
  5. 16
Page 76 / 126 Scroll up to view Page 71 - 75
030-300613 Rev A
76
August 2009
User Guide
VersaLink Wireless Gateway (Model 7500)
14.2
Diagnostics
This section discusses the
Diagnostics
screens (Backup/restore, Date Time, Network Statistics, System Status
Tables, System Logs, Test Utilities, Remote Access, Update Device) of your Gateway and guides you through the
configurable settings.
14.2.1
Backup/Restore
The following screen will appear if you select
Advanced > Diagnostics > Backup/Restore
from the main menu.
This screen allows you to configure backup and restore settings for your Gateway.
NOTE:
Backup settings are stored in a separate area of flash memory in the Gateway, not to an external backup
source.
CAUTION:
If you restore the Gateway to factory default settings, any data that the Gateway has reported will be
lost.
Current configuration becomes
Backup Configuration
Click this button to store the current configuration of your Gateway
so that it can be recalled later.
Backed up configuration becomes
current configuration
Click this button to retrieve the last back up copy of all configuration
parameters and make these values current.
Factory default becomes Current
configuration
Click this button to set all user configurable parameters back to the
factory default settings.
Page 77 / 126
030-300613 Rev A
77
August 2009
User Guide
VersaLink Wireless Gateway (Model 7500)
14.2.2
Date Time
The following screen will appear if you select
Advanced > Diagnostics > Date Time
from the main menu. This
feature allows you to set the date and time values of your Gateway. If you change the settings in this screen, click
apply
and then
OK
. If you click
Cancel
, the screen will return to its previous settings.
Local Time
Displays the local time after applying the daylight savings settings.
TimeZoneName
Click this drop-down menu to select your Time Zone values: Eastern, Central,
Mountain, or Pacific.
Daylight Saving Time
Enabled/Disabled
Click this check box to enable daylight savings feature.
Daylight Saving Time
Start
Click these drop-down menus and type data into fields to set daylight savings start
date and time.
Daylight Saving Time
End
Click these drop-down menus and type data into fields to set daylight savings end
date and time.
Automatic Time Update
Enabled/Disabled
Click this check box to enable or disable the Automatic Time Update feature. This
feature contains the entry for the time server that is contacted for obtaining the
time settings. Enabling or disabling the NTP server allows you to edit the first
NTP server entry or add/remove/edit a second NTP server.
Time Server
Displays the Time Server used for updating the Gateway.
Action Edit
Click this icon to open the
Time Server Settings
screen (
Advanced >
Diagnostics > Date Time > Time Server Settings
). Refer to section 14.2.2.1,
“Time Server Settings.”
Action New
Click this icon to open the
Time Server Settings
screen (
Advanced >
Diagnostics > Date Time > Time Server Settings
). Refer to section 14.2.2.1,
“Time Server Settings.”
Add
Click this icon to open the
Time Server Settings
screen (
Advanced >
Diagnostics > Date Time > Time Server Settings
). Refer to section 14.2.2.1,
“Time Server Settings.”
Page 78 / 126
030-300613 Rev A
78
August 2009
User Guide
VersaLink Wireless Gateway (Model 7500)
14.2.2.1
Time Server Settings
The following screen will appear if you click the
Action Edit
(
),
Action New
(
), or
Add
icons/link on the
Date Time
screen (
Advanced > Diagnostics > Date Time > Time Server Settings
). This screen allows you to edit
NTP server domain name or IP address. If you change the settings in this screen, click
apply
and then
OK
. If you
click
Cancel
, the screen will return to its previous settings.
14.2.3
Network Statistics
This section discusses the
Network Statistics
screens (Summary, Ethernet, DSL Transceiver, WAN VC, USB, and
Wireless) of your Gateway and guides you through the configurable settings.
Page 79 / 126
030-300613 Rev A
79
August 2009
User Guide
VersaLink Wireless Gateway (Model 7500)
14.2.3.1
Summary
The following screen will appear if you select
Advanced > Diagnostics > Network Statistics > Summary
from the
main menu. This screen displays summary information about your Gateway. The DSL connection state is shown
along with the amount of traffic that has passed through the Gateway. Each connection profile is listed with its
associated usage information.
Connection Rate
Displays status of DSL signal and rate of your connection.
Connection Status
Displays the number of packets received (IN) or sent (OUT) in packets via DSL as well as
corresponding error packets.
IP Network Address
Displays IP Network Address data.
•
PPP: An IP address identifies your device on the Internet.
•
Gateway: IP address of your Gateway.
•
Primary DNS: Provided by your ISP.
•
Secondary DNS: Provided by ISP.
Ethernet Status
Displays the number of packets received (IN) or sent (OUT) in packets via Ethernet.
ATM Network
Address
Displays your VPI and VCI values, which are provided by your ISP.
Firewall Status
Displays your firewall traffic in packets.
•
Passed: Monitors information traffic that was successfully received (IN) or
transmitted (OUT) in packets.
•
Dropped: Monitors information traffic that was not successfully received (IN) or
transmitted (OUT) due to your firewall settings.
Connection Information
Connection Name
Displays the connection profile established previously in section 7, “Accessing Your
Gateway.”
Connection Duration
Displays how long your PPP session has been connected.
Status
Displays the status of your PPP session as either UP (connected) or DOWN (disconnected).
Number of Reconnects
Displays the number of attempts that were made to establish a PPP session.
Page 80 / 126
030-300613 Rev A
80
August 2009
User Guide
VersaLink Wireless Gateway (Model 7500)
14.2.3.2
Ethernet
The following screen will appear if you select
Advanced > Diagnostics > Network Statistics > Ethernet
from the
main menu. This screen displays information about your Gateway’s Ethernet connections.
Ethernet MTU
Displays the maximum transmission unit (MTU): the number of data bytes
contained in the Ethernet frame.
Packet Information
Displays packet information reported for ports 1-4.
In Non Unicast Packets
Displays the number of non-Unicast packets received on the Ethernet interface.
“In” is from the PC to the Gateway.
In Unicast Packets
Displays the number of Unicast packets received on the Ethernet interface. “In” is
from the PC to the Gateway.
Out Non Unicast Packets
Displays the number of non-Unicast packets transmitted on the Ethernet interface.
“Out” is from the Gateway to the PC.
Out Unicast Packets
Displays the number of Unicast packets transmitted on the Ethernet interface.
“Out” is from the Gateway to the PC.
Interface Description
Displays the Gateway’s interface type.

Rate

3.5 / 5 based on 2 votes.

Popular Westell Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top