19216811.live030-300613 Rev A
61
August 2009
User Guide
VersaLink Wireless Gateway (Model 7500)
Service Name
Click this drop-down menu to select the NAT (Network Address Translation) service
for configuring your Gateway.
Service Name
lists all of the configured services
available for the selected Service Profile. To enable a predefined or custom service,
select it from the drop-down menu, and click the
enable
button. The
Enable
PreDefined Service
window will open, showing a detailed description of that service
and will step you through the process of enabling a service. The Gateway will then
configure the port(s) to enable the service. Refer to section 13.2.2.2, “Enable
PreDefined Service.”
•
To delete the selected service from the
Service Name
listing, click the
delete
button.
•
To edit a Custom Defined Service, including allowing you to delete an
existing rule from the service or add new rule to the service, click the
edit
button. Refer to section 13.2.2.1, “Edit Custom Service.”
UPnP Enable
Click this check box to enable UPnP (Universal Plug and Play), allowing the
Gateway to seamlessly connect and communicate with other UPnP-enabled devices,
without the need for user configuration, centralized servers, or product-specific
device drivers. When enabled, UPnP advertises the presence of your Gateway on the
LAN. Click
OK
to restart the Gateway and save the changes. The Gateway will then
configure itself to respond to UPnP messages. By default,
UPnP Enable
is disabled.
Service Name
Displays the Service Name of a previously enabled NAT service.
LAN IP Address
Displays the LAN IP Address of a previously enabled NAT service.
details
Click this button to open the
Service Details
screen (
Security > Services > Port
Forwarding > Service Details
). This allows you to view
details of the selected
enabled port forwarding service.
delete
Click this button to delete an enabled NAT service.
new custom service
Click this button to open the
New Custom Service
screen (
Security > Services >
Port Forwarding > New Custom Service
), which will step you through the process
of creating a custom service entry.
Firewall is enabled
Click this link to open the
Security Level
screen (
Security > Security Level
),
allowing you to modify your firewall settings as needed. Refer to section
Static NAT
Click this button to open the Static NAT pop-up window. Use this window to map a
private IP address to a public IP address, where the public address is WAN IP address
of the Gateway. This allows an internal host to have an unregistered (private) IP
address and still be reachable over the Internet.
•
To enable a Static NAT device, click the drop-down menu to select a
Static
NAT Device
, type the IP Address of the device that will function as the
default NAT destination in the provided field, and click the
enable
button.
•
To disable a static NAT device, click the drop-down menu to select a
Static
NAT Device
, and click the
disable
button.
•
Click
cancel
to return to the
Port Forwarding
screen without implementing
any changes.