Page 51 / 96
Scroll up to view Page 46 - 50
47
Jetpack Admin Password
The Jetpack Admin Password page allows you to display, hide and/or change the Admin Password.
Display or Hide the Admin Password
Slide the
ON/OFF
button to
ON
to display the Jetpack Admin Password on the device or to
OFF
to
hide the Jetpack Admin Password on the device.
Change the Admin Password
To change your Admin Password, follow these steps:
➊
Type your current password in the
Enter current password
field.
➋
Type your new password in the
Enter new password
field.
➌
Type your new password a second time in the
Confirm new password
field.
➍
Click
Save Changes
to save any changes made to your password.
Page 52 / 96
48
Preferences
The Preferences page contains the following:
•
USB Mode
— The
USB mode
menu changes the USB mode to
Ethernet over USB
or
Charge
only
.
•
Charge only
—
If selected, the Jetpack will only draw power from the USB port. No
communication is possible between your computer and this device when connected
via USB. Note that a standard USB port does not provide sufficient current to power this
device, so the battery will still be depleted.
•
Ethernet over USB
— If selected, an Ethernet (TCP/IP) connection is established between
the Jetpack and your computer. The computer can access the Internet and the Web-based
interface via the USB connection. For Windows XP, drivers must be installed to enable
Ethernet over USB. The link to download and install these drivers is located on the Home
page. If Ethernet over USB is not available, you can still communicate via Wi-Fi.
•
Automatic shutdown
— The
Automatic shutdown
menu changes the amount of time (
After
5 minutes
,
After 10 minutes
,
After 30 minutes
or
Never)
that expires before the Jetpack
automatically shuts down.
•
Turn off display
— The
Turn off display
menu changes the amount of time (
After 30 seconds
,
After 1 minute
,
After 5 minutes
or
Never)
that expires before the display turns off.
•
Save Changes —
Click
Save Changes
whenever you make a change to finalize and save the
new setting.
Page 53 / 96
49
Software Update
The Software Update page contains the following sections:
•
Current Software
— Displays information for the current software version, date of last check
for updates and the number of updates currently available.
•
Last update
— Displays the date of the last software update.
•
Update History
— Displays the software update history.
Page 54 / 96
50
Backup and Restore
The Backup and Restore page contains the following sections:
•
Backup
— Allows you to save your Jetpack settings to your computer. You must enter your
Admin Password in the
Jetpack Admin Password
field and click
Download
to save settings to
your computer.
•
Restore
— Allows you to upload a previously saved backup file from your computer to your
Jetpack. Click
Browse
and select a file, then enter the Admin Password in effect when the
backup file was saved in the
Jetpack Admin Password
field and click
Restore Now
.
•
Restore to Factory Defaults
— Allows you to restore all settings on your Jetpack to the
factory default values. Click
Restore Factory Defaults
to restore all such settings. If prompted
for a password, use the default Admin Password which can be found on the Jetpack by
selecting
Menu > Wi-Fi Name/Password > More > More >Jetpack Admin
.
Page 55 / 96
51
Wi-Fi
The Wi-Fi menu allows you to customize the Wi-Fi profiles and view details about the devices
connected to your Jetpack.
The Wi-Fi menu contains the following sections:
•
Display Wi-Fi Name
— Slide the
ON/OFF
button to
ON
to display the Wi-Fi name on the
Jetpack display.
•
Display Wi-Fi Password
— Slide the
ON/OFF
button to
ON
to display the current Wi-Fi
password on the Jetpack display.
•
Wi-Fi name
— The Network Name or SSID for the Wi-Fi network created by the Jetpack.
•
802.11 Mode
— Use this setting to change the Wi-Fi mode. The wireless network technology
used.
802.11g + 802.11b + 802.11n
is most compatible, allowing both 802.11b, 802.11g, and
802.11n devices to connect to the wireless network.
19216811.live