1. Home
    2. /
  2. Manuals
    3. /
  3. Verizon
    4. /
  4. MiFi-4620L
    5. /
  5. 5
Page 21 / 101 Scroll up to view Page 16 - 20
16
➍
Connect the micro USB end of the charger to the micro USB port of the device.
➎
Plug the other end of the AC wall charger into the appropriate electrical outlet. Charge for at
least three hours.
CAUTION!
Use only batteries and chargers with your device that have been approved by
Novatel Wireless. The failure to use approved batteries and chargers may increase the risk that
your device will overheat, catch fire, or explode, resulting in serious bodily injury, death, or
property damage.
You are now ready to connect your computer or other Wi-Fi device to the MiFi 4620L.
Remove the Battery
To remove or replace the battery, follow these steps:
➊
Remove the cover to open the battery compartment, located on the bottom of the device.
Set the cover aside.
➋
Insert your fingernail into the battery removal divot and lift the battery out of the battery
compartment.
Page 22 / 101
17
Battery Tips
WARNING !
Use only batteries and chargers with your device that have been approved by
Novatel Wireless. Always use Novatel Wireless original batteries and chargers. The warranty does
not cover damage caused by non-Novatel Wireless batteries and/or chargers.
•
It normally takes at least three hours to fully charge the battery with the wall charger.
•
Do not use sharp objects to access the battery well, this may damage the device and the
battery.
•
Do not use excessive force to remove the battery or to access the battery well.
•
The battery discharges more rapidly as additional devices access your MiFi device.
•
Battery life depends on the network, signal strength, temperature, features, and accessories
you use.
•
Your device also works with an approved car charger.
•
New batteries or batteries stored for a long time may take more time to charge.
•
When charging your battery, keep it near room temperature.
•
When storing your battery, keep it uncharged in a cool, dark, dry place.
•
Never expose batteries to temperatures below -20°C (4°F) or above 60°C (140°F).
•
Never leave the device in an unattended vehicle due to uncontrollable temperatures that
may be outside the desired temperature for this device.
•
Some batteries perform best after several full charge/discharge cycles.
•
It is normal for batteries to gradually wear down and require longer charging times. If you
notice a change in your battery life, it is probably time to purchase a new battery.
IMPORTANT
Whenever you remove or insert either the battery or the SIM card, ensure your
MiFi device is not connected to any device or power source. Never use tools, knives, keys, pens or
any type of object to force the door open or to remove the battery. Using any of these types of
objects could result in puncturing the MiFi battery.
WARNING !
The failure to use approved batteries and chargers may increase the risk that your
device will overheat, catch fire, or explode, resulting in serious bodily injury, death, or property
damage. To avoid risk of explosion, never dispose of batteries in a fire.
Page 23 / 101
18
Power the MiFi 4620L On and Off
Power On
•
Press the Power Button until the LED illuminates green or violet.
Power Off
•
Press and hold the Power Button until the display shows
MiFi Powering Off
and the LED turns
yellow.
Activate Your Device
Your SIM card should come pre-activated and ready to connect. Insert the SIM card, power up the
MiFi device, and connect.
If your SIM card did not come pre-activated or you need to re-activate your SIM card, you can:
•
go to your network operator’s retail store
•
contact your network operator's customer service department
IMPORTANT
The MiFi 4620L requires an activated account with a wireless carrier to function.
Page 24 / 101
19
Connecting to the Device
Now you can connect your computer to your MiFi 4620L using Wi-Fi.
Connect to MiFi Settings
To connect to the MiFi 4620L, follow these steps:
➊
Turn on your computer and turn on the MiFi 4620L.
The MiFi 4620L's LED should be slow blinking green or violet, indicating the device is in
service and ready to connect. The MiFi 4620L broadcasts its own wireless network.
➋
On your computer, use the Wi-Fi manager (Windows) or the AirPort menu bar icon
(Mac OS X) to connect wirelessly to the MiFi 4620L wireless network.
Tip!
The steps to connect to a Wi-Fi network vary depending on your operating system and whether
you use the native application or third-party software. Generally, you click an icon in the Windows
notification area where you can select
View Available Wireless Networks,
or click the Airport
icon in the menu bar on a Mac. If you are unfamiliar with wireless networking on your computer,
consult the computer help system.
➌
Connect to the network name found on the sticker that appears on the back of the MiFi
device as well as on the Activation Guide. The network name or SSID is in the format
MiFi4620L Jetpack XXXX Secure, where XXXX are four digits unique to your device.
➍
Enter the 8-digit Wi-Fi/Admin password. The password appears on the back of the MiFi
device as well as on the Activation Guide.
NOTE
If you are entering the SSID manually, please add the word “Secure” after the SSID. For example,
“MiFi4620L Jetpack 1A3B Secure”.
➎
You can change device settings by connecting to the MiFi Settings on-device web page. (See
Configuring MiFi Settings
on page 22.)
IMPORTANT
Charge the battery completely before you connect your computer to your MiFi
device. (See
Insert and Charge the Battery
on page 15.)
Page 25 / 101
20
Using the Device After Setup is Complete
You can use the MiFi 4620L as a wireless mobile hotspot to connect your computer and/or (up to a
total of ten) other Wi-Fi enabled devices to the mobile broadband network.
You can customize the MiFi 4620L's settings using MiFi Settings. (See
Configuring MiFi Settings
on
page 22.)
Normal Use
•
The MiFi 4620L is powered on as soon as you press the power button and the display turns
on.
•
The LED on the device becomes green (4G) or violet (3G) and blinks according to the
connection speed.
Setting up a Temporary Hotspot
See
Setting Up a Temporary Hotspot
on page 31 for more information about setting up a
temporary hotspot.
Security for the MiFi 4620L
The MiFi 4620L comes from the factory with security enabled. A sticker on the back panel includes
the name of the wireless network (SSID) and the network password. You can change the security
settings in the MiFi Settings Wi-Fi screen. (See
Wi-Fi
on page 28.)

Rate

4 / 5 based on 1 vote.

Popular Verizon Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top