Page 66 / 80 Scroll up to view Page 61 - 65
Product Specifications
Regulatory Statements
Wireless Communications
Limited Warranty and Liability
Safety Hazards
Proper Battery Use and Disposal
Product Specifications and
Regulatory Information
5
Page 67 / 80
66
Product Specifications
General
Name:
Verizon Wireless MiFi 2200
Model:
MiFi2200 VZW
Approvals:
FCC (North America); CDG
Weight:
58 g / 2.05 oz
Dimensions (with USB folded out):
90 mm x 60 mm x 8.8 mm,
3.54 in x 2.36 in x 0.35 in
Wireless Network – Dual Mode:
CDMA 1X/EV-DO
Wireless Network –
WiFi Mode
802.11 b/g
Default SSID
Verizon MiFi2200 (see sticker on device
for the identifier specific to your device)
Battery
Size
Time required for full charge when charging
from the AC Charger
Time required for full charge when charging
from the computer
microUSB cable
1150 mAh
2.5 hours (when not in use)
7-8 hours (when not in use)
Chip Set:
QUALCOMM® QSC6085
Interface Type:
Type A USB Port for microUSB cable
(included)
Technology/Bands
Technology:
CDMA Rev A, Rev 0, 1XRTT
Band Designation:
800/1900 MHz
Transmit Band:
824.7-848.31MHz/1851.25-1908.75MHz
Receive Band:
869.7-893.31MHz/1931.25-1988.75MHz
Environmental
Operating Temperature:
-10 ° C to +45° C (14°F to 113° F)
Storage Temperature:
-20° C to 25° C (-4° F to 77° F)
Drop:
1 meter (3.28 feet) drop, no damage – fully operational
Vibration Stability:
5 Hz to 500 Hz, 0.1 octave/second
Page 68 / 80
67
Regulatory Statements
CE Marking
This device has been tested to and conforms to the essential regulatory requirements of the
European Union R&TTE directive 1999/5/EC and has attained CE Marking.
Federal Communications Commission Notice (FCC – United States)
This equipment has been tested to, and found to be within the acceptable limits for a Class B digital device,
pursuant to part 15 of the FCC Rules and Industry Canada ICES-003. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a residential
environment. This equipment generates radio frequency energy and is designed for use in accordance
with the manufacturer’s user manual. However, there is no guarantee that interference will not occur in
any particular installation. If this equipment causes harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, you are encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and the receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help
This device complies with Part 15 of the Federal Communications Commission (FCC) Rules. Operation is
subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired
operation.
WARNING:
DO NOT ATTEMPT TO SERVICE THE WIRELESS COMMUNICATION DEVICE YOURSELF. SUCH ACTION
MAY VOID THE WARRANTY. THE MiFi 2200 DEVICE IS FACTORY TUNED. NO CUSTOMER CALIBRATION OR
TUNING IS REQUIRED. CONTACT YOUR SERVICE PROVIDER FOR INFORMATION ABOUT SERVICING YOUR
WIRELESS COMMUNICATION DEVICE.
Notice to Consumers
: Any changes or modification not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
Page 69 / 80
68
NOTE:
The Radio Frequency (RF) emitter installed in your modem must not be located or operated in
conjunction with any other antenna or transmitter, unless specifically authorized by Novatel Wireless
Technologies.
MODIFICATIONS:
The FCC requires that you be notified that any changes or modifications made to this
device that are not expressly approved by Novatel Wireless, Inc. may void your authority to operate the
equipment.
RF Exposure Content
FCC Equipment Authorization ID
:
PKRNVWMiFi2200
This device is only authorized for use in Mobile applications. At least 20cm (8 inches) of separation
between the antenna and the users body must be maintained at all times.
The FCC has granted an Equipment Authorization for this wireless modem with all reported SAR
levels evaluated as in compliance with the FCC RF exposure guidelines.
Page 70 / 80
69
Wireless Communications
IMPORTANT
Due to the transmission and reception properties of wireless communications,
data occasionally can be lost or delayed.
This can be due to the variation in radio signal strength that results from changes in the
characteristics of the radio transmission path. Although data loss is rare, the environment where you
operate the modem might adversely affect communications.
Variations in radio signal strength are referred to as fading. Fading is caused by several different
factors including signal reflection, the ionosphere, and interference from other radio channels.
Verizon Wireless or its partners will not be held responsible for damages of any kind resulting from
the delays or errors in data transmitted or received with the MiFi 2200 device, or failure of the
MiFi 2200 device to transmit or receive such data.
Limited Warranty and Liability
Novatel Wireless, Inc. warrants for the 12-month period immediately following receipt of the
Product by Purchaser that the Product will be free from defects in material and workmanship under
normal use.
THESE WARRANTIES ARE EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING, WITHOUT LIMITATION, ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE.
The exclusive remedy for a claim under this warranty shall be limited to the repair or replacement,
at Novatel Wireless’ option, of defective or non-conforming materials, parts or components.
The
foregoing warranties do not extend to (I) non conformities, defects or errors in the Products due
to accident, abuse, misuse or negligent use of the Products or use in other than a normal and
customary manner, environmental conditions not conforming to Novatel Wireless’ specification, of
failure to follow prescribed installation, operating and maintenance procedures, (II) defects, errors or
nonconformity’s in the Product due to modifications, alterations, additions or changes not made in
accordance with Novatel Wireless’ specifications or authorized by Novatel Wireless, (III) normal wear
and tear, (IV) damage caused by force of nature or act of any third person, (V) shipping damage,
(VI) service or repair of Product by the purchaser without prior written consent from Novatel
Wireless, (VII) products designated by Novatel Wireless as beta site test samples, experimental,
developmental, reproduction, sample, incomplete or out of specification Products, or (VIII) returned
products if the original identification marks have been removed or altered.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top