1. Home
    2. /
  2. Manuals
    3. /
  3. Verizon
    4. /
  4. MBR1515LVW
    5. /
  5. 5
Page 21 / 114 Scroll up to view Page 16 - 20
Basic Setup and Traffic Meter
21
Verizon 4G LTE Router MBR1515LVW
4.
Available buttons are:
•
Connect
. Manually connect to the network.
•
Disconnect
. Disconnect from the current network.
•
Apply
. Apply the changes that you made.
•
Cancel
. Discard changes.
•
Refresh
. Update the connection status.
Country
Select your country from the drop-down list.
Internet Service Provider
Select your Internet service provider from the drop-down list.
Connect automatically at startup
When this check box is selected, the modem automatically connects
to the network when powered up. This check box should be selected
after login information is provided.
Reconnect automatically when
connection is lost
When this check box is selected, the modem attempts to reconnect to
the network when the connection is lost. Under normal situations, this
setting should be selected.
Wi-Fi Button Configuration
Select the option to determine the behavior of the Wi-Fi button on the
front panel when it is pressed.
•
Control Wi-Fi Only
. When you select this radio button, pressing
the Wi-Fi button toggles the Wi-Fi function. If Wi-Fi is turned on,
pressing the button turns off the Wi-Fi. Pressing it again turns on
the Wi-Fi. This function is available only if the Wi-Fi function is
enabled. The 4G broadband function is unaffected.
•
Control Both Wi-Fi and 4G Broadband
. When you select this
radio button, pressing the Wi-Fi button toggles both the Wi-Fi
function and 4G broadband at the same time. If Wi-Fi is turned
on, pressing the button turns off the Wi-Fi. At the same time, the
4G broadband connection is disconnected. If you press the
button again, Wi-Fi is turned on and the router attempts to
reestablish the 4G broadband connection. Depending on the
coverage, 4G broadband coverage might or might not be
connected successfully.
•
Control 4G LTE Only
. When you select this radio button,
pressing the Wi-Fi button toggles the 4G LTE function. If 4G LTE
is turned on, pressing the button turns off the 4G LTE. Pressing it
again turns on the 4G LTE. This function is available only if the
4G LTE function is enabled. The Wi-Fi function is unaffected.
Connection status
Current WAN port status.
Fields and Check Boxes
Description
Page 22 / 114
Basic Setup and Traffic Meter
22
Verizon 4G LTE Router MBR1515LVW
Wide Area Network (WAN) Ethernet Broadband Settings
To manually configure your WAN Ethernet Broadband Internet settings:
1.
Log in to the router as described in
Log In to Your Router
on page 17.
2.
From the main menu, select
Basic Setup > WAN Ethernet Broadband Settings
.
The following question displays:
Select the option based on the type of account you have with your ISP.
•
If you need to enter login information every time you connect to the Internet, or you
have a PPPoE account with your ISP, select
Yes
, and see
Yes, a Login Is Required
on page 23.
•
Otherwise, select
No
and see
No, a Login Is Not Required
on page 25.
Note:
If you have installed PPP software such as WinPoET (from
Earthlink) or Enternet (from PacBell), then you have PPPoE. Select
Yes
. After selecting Yes and configuring your router, you do not need
to run the PPP software on your computer to connect to the Internet.
Page 23 / 114
Basic Setup and Traffic Meter
23
Verizon 4G LTE Router MBR1515LVW
Yes, a Login Is Required
To configure your Internet connection when a login is required:
1.
Adjust the settings as needed based on your Internet connection.
The fields in this screen are described in the following table:
Fields and Check Boxes
Description
Internet Service Provider
Select the service that your ISP provides.
•
Other (PPPoE) is the most common.
•
PPTP is used in Austria and other European countries.
•
Telstra BigPond is for Australia only.
Login
This login name is usually the name that you use in your email address. For
example, if your main mail account is [email protected], type JerAB in this
field.
Some ISPs (such as Mindspring, Earthlink, and T-DSL) require that you use
your full email address when you log in. If your ISP requires your full email
address, type it in the Login field.
Password
Type the password that you use to log in to your ISP.
Service Name (If Required)
If your ISP provided a service name, enter it here. Otherwise, this field can be
left blank.
Page 24 / 114
Basic Setup and Traffic Meter
24
Verizon 4G LTE Router MBR1515LVW
2.
The following buttons are available when you are done:
•
Apply
. Apply the changes that you made.
•
Cancel
. Discard changes.
•
Test
. Connect to the My Verizon website. If you connect successfully, your settings
work, and you can click
Logout
to exit these screens.
Connection Mode
Set the connection mode to
Dial on Demand
,
Always On
, or
Manually
Connect
.
•
With the default setting,
Dial on Demand
, a PPPoE connection
automatically starts with outbound traffic to the Internet, and it
automatically terminates if the connection is idle based on the value in the
Idle Timeout field.
•
When the connection mode is set to
Always On
, the PPPoE connection
automatically starts when the computer boots up, but the connection does
not time out. The router keeps trying to bring up the connection after it is
disconnected for some reason.
•
If you select
Manually Connect
, you must go to the Router Status screen
and click the
Connect
button to connect to the Internet. The manual
connection does not time out, and you have to click the
Disconnect
button on the Router Status screen to disconnect it.
Idle Timeout (In Minutes)
An idle Internet connection will be terminated after this time period. If this
value is zero (0), the router keeps the connection alive by reconnecting
immediately whenever the connection is lost.
Internet IP Address
If you log in to your service or your ISP did not provide you with a fixed IP
address, the router finds an IP address for you automatically when you
connect. Select
Get Dynamically from ISP
.
If you have a fixed (static, permanent) IP address, your ISP has provided you
with an IP address. Select
Use Static IP Address
and type in the IP address.
Fields and Check Boxes
Description
Page 25 / 114
Basic Setup and Traffic Meter
25
Verizon 4G LTE Router MBR1515LVW
No, a Login Is Not Required
To configure your Internet connection when a login is not required:
1.
Adjust the settings as needed based on your Internet connection.
The fields in this screen are described in the following table:
Fields and Check Boxes
Description
Account Name (If Required)
This name is also known as the host name or system name.
For most users, type your account name or user name in this field. For
example, if your main mail account is [email protected], type JerAB in this
field.
If your ISP has given you a specific host name, type it (for example,
CCA7324-A).
Domain Name (If Required)
For most users, you can leave this field blank, unless the domain name is
required by your ISP. You can type the domain name of your ISP. For
example, if your ISP mail server is mail.xxx.yyy.zzz, you would type
xxx.yyy.zzz as the domain name.
If you have a domain name given to you by your ISP, type it in this field. (For
example, Earthlink Cable might require a host name of home, and Comcast
sometimes supplies a domain name.)
If you have a cable modem, this domain name is usually the workgroup
name.

Rate

4 / 5 based on 1 vote.

Popular Verizon Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top