Page 66 / 119 Scroll up to view Page 61 - 65
Ubee Interactive
Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide
March 2014
62
Label
Description
Add User
Remove User
Enable
Defines user accounts.
To add a new user, add the user name and click Add
User. The user then becomes selectable in the User
Settings drop down menu.
To select an existing user, choose the user from the User
Settings drop down menu.
To activate the user, check Enable.
To remove a user, select the user from the User Settings
drop down menu and click Remove User.
Password
Defines the password for this user. It is required when this
user tries to access the Internet via the device.
Re-Enter Password
Confirms the password with the re-entered password.
Trusted User
Defines the selected user as a trusted user when enabled is
checked. The user is limited to timing and content when
visiting the Internet, as defined in the following fields.
Content Rule
Selects from the drop down menu an existing content rule that
defines what kind of Websites the user can or cannot visit.
White List Access Only
Selects the White List Access option. If you have created a
content rule that defines a black list and white list, select the
White List Access Only checkbox to force the DVW326 to
execute the policy for the selected user.
Page 67 / 119
Ubee Interactive
Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide
March 2014
63
8.2
Using the Basic Option
The
Basic
option allows you to select rules to block certain Internet content and Web
sites. After you change your Access Control settings, click the appropriate Apply, Add, or
Remove button for your new settings to take effect. Refresh your browser’s display to see
the currently active settings.
Steps
To filter Internet content and Web sites:
1.
Click the
Access Control
link from the top of the screen.
2. Click
Basic
from the left side of the screen. The
Basic
fields are explained following
this screen example.
Time Access Rule
Selects a defined time access rule to apply to the selected
user.
Session Duration
Allows you to enter a time in minutes for the user’s session to
expire. When the session expires, the user can log in again for
the same session duration.
Inactivity Time
Allows you to enter the time out value when a user has no
activity on the Internet. When the time expires, the user
interface to the Internet is canceled.
Apply
Saves all changes when clicked.
Trusted Computers
Defines the trusted hosts that can bypass the Access Control
Process.
Add
Adds the trusted host’s MAC address entered in the given
area and Add is clicked.
Remove
Removes a trusted computer from the list when it is
highlighted and Remove is clicked.
Label
Description
Page 68 / 119
Ubee Interactive
Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide
March 2014
64
Label
Description
Enable Access Control
Activates the Access Control feature when checked.
Apply
Saves all changes in the screen and activates Access Control,
if enabled.
Content Policy Configuration
Add New Policy
Adds a policy to the Policy List. Enter the policy name and
click Add New Policy. The policy then becomes selectable in
the Content Policy List drop down menu.
Content Policy List
Lists existing policies you can choose to use.
Remove Policy
Deletes a policy from the list. Select the policy from the
Content Policy List drop down menu and click Remove Policy.
Keyword List
Displays keywords you can use to block Web site addresses
(URLs) containing those words.
Add Keyword
Adds a keyword to the keyword list. Enter the word in the field
next to the Add Keyword button and click Add Keyword. The
keyword is added to the Keyword list.
Page 69 / 119
Ubee Interactive
Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide
March 2014
65
8.3
Using the ToD Filter Option
The
ToD
(Time of Day)
Filter
option allows the configuration of time-based access
policies to block all Internet traffic at specified times.
Steps
To configure ToD filters:
1.
Click the
Access Control
link from the top of the screen.
2. Click
ToD Filter
from the left side of the screen. The
ToD Filter
fields are explained
following this screen example.
Remove Keyword
Removes a keyword from the keyword list. Select the keyword
from the Keyword List, and click Remove Keyword.
Blocked Domain List
Displays Web domains (for example, unwanted.com) you can
use to block access to those domains.
Add Domain
Adds a domain to the Blocked Domain List. Enter a domain in
the field next to the Add Domain button, and click Add Domain.
Remove Allowed Domain
Removes a domain from the Blocked Domain List. Select the
domain from the Blocked Domain List, and click Remove
Domain.
Allowed Domain List
Displays domains you want to allow access to.
Add Allowed Domain
Adds allowed domains to the list. Enter the name and click
Add Allowed Domain.
Remove Allowed Domain
Removes domain names from the Allowed Domain List.
Highlight the domain from the list and click Remove Allowed
Domain.
Override Password
If you encounter a blocked website, you can override the block
by entering a password.
Password
Enter a password for overriding blocked websites.
Re-Enter Password
Re-enter the password.
Access Duration
Set a time duration (in minutes) for access to the blocked site
when the block has been overridden by entering the password.
Apply
Saves the password and access duration time.
Label
Description
Page 70 / 119
Ubee Interactive
Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide
March 2014
66
Label
Description
Add New Policy
Adds a new policy. Enter a policy name in the field next to the
Add New policy button, and click the Add New Policy button.
The policy then becomes selectable in the Time Access Policy
List drop down menu.
Time Access Policy List
Lists the existing policies in a drop-down menu.
Enabled
Activates a policy. Select the policy from the Time Access
Policy List drop-down menu and check Enabled.
Remove
Deletes a policy. Select the policy from the Time Access Policy
List drop-down menu and click Remove.
Days to Block
Selects the days to block Internet access.
Time to Block:
All Day or a specific time frame
Allows you to define the times of day to block.
To block all day, check All Day to eliminate all access
during the days selected.
To block a specific time frame to block Internet access for
the days selected, enter the Start time and the End time.
Select AM or PM for each.
Ports to Block
Defines a port range to block if the Enabled box is checked.
Port Start: Enter the starting port number to be blocked.
Port End: Enter ending port number to be blocked.
Protocol: Select the protocol type. Options are UDP, TCP,
or Both.
Apply
Saves all changes when clicked.

Rate

4 / 5 based on 3 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top