Page 61 / 70 Scroll up to view Page 56 - 60
Ubee Interactive
3.10
Parental Control
DDW3612 Subscriber User Guide
July, 2010
57
3.10
Parental Control
This chapter provides instructions for controlling the internet access of users on the
DDW3612 Wireless Cable Modem Gateway network. These parental control features
include defining user/password access, defining the what times users are allowed to
access the internet, blocking certain web sites, and blocking certain sites by keywords.
1.
Access the web interface. Refer to
page 7
, if needed.
2. Click the
Parental Control
link from the top of the screen.
3.10.1
Parental Control - User Setup
The
User Setup
option allows the configuration of user accounts that can or cannot
connect to your wireless or wired network, and the parameters of the connection.
1.
Access the web interface. Refer to
page 7
, if needed.
2. Click the
Parental Control
link from the top of the screen.
3. Click
User Setup
from the left side of the screen. The
User Setup
fields are
explained following this screen example. Note: To enable Parental Control, refer to
page 59
.
Page 62 / 70
3.10
Parental Control
Ubee Interactive
58
DDW3612 Subscriber User Guide
July, 2010
Label
Description
User Configuration/Add
User/Remove
User/Enable
Select an existing user account to edit from the User Settings
pop-up menu. Or, enter a new user name and click the Add
button. To activate the user, click the Enable button. To remove
a user, select a user from the pop-up menu and click the
Remove button.
Password
Enter the password for this user. It is required when this user
tries to access the Internet via the wireless router.
Re-Enter Password
Re-enter the password as required.
Trusted User
Click the Enable checkbox to allow the selected user to be
trusted user. That means the user is now limited to timing and
content when visiting Internet, as defined in the following
fields.
Content Rule
Select from the pop-up menu an existing content rule that
defines what kind of websites the user can visit or not.
White List Access Only
If you have created a content rule which defines a black list
and white list, then you can select the White List Access Only
checkbox to force the wireless modem to execute the policy
for the selected user
Time Access Rule
Select a defined time access rule to apply to the selected user.
Session Duration
Enter a time in minutes for the user’s session expiration. Upon
expiration, the user can log back in for the same session
duration.
Inactivity Time
Enter the time out value when a user has no activity on the
Internet. When the time expires, the user interface to the
internet cancelled.
Apply
Click to save all changes.
Trusted Computers
Define the trusted hosts that will bypass the Parental Control
Process.
Add
Enter the trusted host’s MAC address and click the Add button
to save.
Remove
To remove a trusted computer, highlight it from the list and
click the Remove button.
Page 63 / 70
Ubee Interactive
3.10
Parental Control
DDW3612 Subscriber User Guide
July, 2010
59
3.10.2
Parental Control - Basic Settings
The
Basic
option allows basic selection of rules which block certain Internet content
and certain Web sites. When you change your Parental Control settings, you must
click on the appropriate "Apply," "Add," or "Remove" button for your new settings to
take effect. Refresh your browser's display to see the currently active settings.
1.
Access the web interface. Refer to
page 7
, if needed.
2. Click the
Parental Control
link from the top of the screen.
3. Click
Basic
from the left side of the screen. The
Basic
fields are explained
following this screen example.
Label
Description
Enable Parental Control
Click the Enable checkbox to activate the Parental Control
feature.
Apply
Click to save all changes in the screen and activate Parental
Control, if enabled.
Content Policy
Configuration
This part of the screen allows you to configure the internet
content access policy.
Add New Policy
Enter a policy name and click Add New Policy to create a new
policy.
Content Policy
List/Remove Policy
Select from the list an existing policy to edit or remove. If
removing a policy, select it from the list and click the Remove
Policy button.
Page 64 / 70
3.10
Parental Control
Ubee Interactive
60
DDW3612 Subscriber User Guide
July, 2010
3.10.3
Parental Control - Tod Filter
The
Tod Filter
option allows the configuration of time-based access policies to block
all internet traffic at specified times.
1.
Access the web interface. Refer to
page 7
, if needed.
2. Click the
Parental Control
link from the top of the screen.
3. Click
Tod Filter
from the left side of the screen. The
Tod Filter
fields are explained
following this screen example.
Keyword List/
Add Keyword/
Remove Keyword
Enter keywords to use in order to filter out web site addresses
(URLs) containing those words. Enter a keyword and click the
Add Keyword button. To remove a keyword, select it from the
list and click Remove Keyword.
Blocked Domain List/
Add Domain/
Remove Domain
Enter web domains (for example, unwanted.com) to use in
order to filter out access to those domains. Enter a domain
and click the Add Domain button. To remove a domain, select
it from the list and click Remove Domain.
Allowed Domain List
This list allows users to visit specific sites. This list restricts
users to these sites only.
Add Allowed Domain
Enter a domain name and click Add Allowed Domain.
Remove Allowed
Domain
To remove a domain, highlight it from the list and click Remove
Allowed Domain.
Label
Description
Add New Policy
Enter a policy name and click the Add New Policy button.
Time Access Policy List
Select a policy to edit from the drop-down list.
Page 65 / 70
Ubee Interactive
3.10
Parental Control
DDW3612 Subscriber User Guide
July, 2010
61
3.10.4
Parental Control - Event Log
The
Event Log
option displays Parental Control event log reporting.
1.
Access the web interface. Refer to
page 7
, if needed.
2. Click the
Parental Control
link from the top of the screen.
3. Click
Event Log
from the left side of the screen. The
Event Log
fields are
explained following this screen example.
Enable/Remove
Select the Enabled checkbox to activate this policy. If the
checkbox is unselected, the policy is not active. To remove a
policy, select the policy from the drop-down list and click the
Remove button.
Days to Block
Select the days to block Internet access. The internet access
times for the days selected to block are defined in the following
fields.
Time to Block
All Day
Select All Day to eliminate all access during the days selected
to block. Or, enter a specific time range in the Start and End
fields.
Apply
Click to save all changes.
Label
Description
Last Occurrence
Displays the time when the last event occurred.
Action
Displays what is done by parental control, including dropping or
permitting access requests.
Target
Displays the destination IP address of a certain access request.
User
Displays the user who triggered this event log.
Source
Displays the source IP address of this event.
Refresh/Clear Log
Click Refresh to update the log with the most currently recorded
events. Click Clear to empty the displayed log entries.

Rate

3.7 / 5 based on 3 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top