Ubee Interactive

Using the Remote Log Option

Ubee DDW365 Advanced Wireless Gateway Subscriber User Guide

•

September 2015

57

7.3

Using the Remote Log Option

Use the

Remote Log

option to define events and send the log to a local SysLog server.

Steps

To configure the firewall remote log:

1.

Click

Firewall

the main menu.

2. Click

Remote Log

from the left side menu. The

Remote Log

fields are explained

following this screen example.

Label

Description

Contact Email Address

Defines the email address where you want to send the log.

SMTP Server Name

Defines the name of the SMTP server, such as

smtp.example.com.

SMTP Username

Defines the username for the email address, such as

[email protected].

SMTP Password

Defines the password for the email address.

E-mail Alerts

Enables or disables log reporting.

Apply

Saves the settings and completes the setup.

E-mail Log

Sends the log to the specified email address.

Clear Log

Deletes the log.

Ubee Interactive

Using the Remote Log Option

Ubee DDW365 Advanced Wireless Gateway Subscriber User Guide

•

September 2015

58

Label

Description

Permitted Connections

Logs all access attempts that are allowed by the firewall when

checked.

Blocked Connections

Logs all access attempts that are blocked by the firewall when

checked.

Known Internet Attacks

Logs all known attacks from the Internet when checked.

Product Configuration Events

When checked, logs when the DDW365 is configured/modified

by a user or administrator.

to SysLog server at 192.168.0.

Defines the IP address of the Syslog server.

Apply

Saves changes.

Ubee DDW365 Advanced Wireless Gateway Subscriber User Guide

•

September 2015

59

8

Understanding the Access Control Menu

The Access Control menu allow you to control Internet access for users on the DDW365

network. It provides the following features:



Define user/password access.



Block specific Web sites and Web sites based on keywords.



Define the times users are allowed to access the Internet.



View a local log to view Internet activity.

Topics

See the following topics:



Using the User Setup Option on page 59



Using the Basic Option on page 61



Using the ToD Filter Option on page 63



Using the Local Log Option on page 65

Steps

To access the Access Control menu:

1.

Access the Web interface. Refer to

Accessing the Web User Interface Locally on page

15

.

2. Click the

Access Control

link from the top of the screen.

8.1

Using the User Setup Option

The

User Setup

option allows you to configure which user accounts can or cannot

connect to your wireless or wired network, and the parameters of each connection.

Steps

To configure user accounts:

1.

Click the

Access Control

link from the top of the screen.

2. The

User Setup

screen is displayed.

Field descriptions follow the screen shot below.

Note:

To enable Access Control, refer to

Using the Basic Option on page 61

.

Ubee Interactive

Ubee DDW365 Advanced Wireless Gateway Subscriber User Guide

•

September 2015

60

Label

Description

Add User

Remove User

Enable

Defines user accounts.



To add a new user, add the user name and click Add

User. The user becomes selectable in the User Settings

drop down menu.



To select an existing user, choose the user from the User

Settings drop down menu.



To activate the user, check Enable.



To remove a user, select the user from the User Settings

drop down menu and click Remove User.

Password

Defines the password for this user. It is required when this

user tries to access the Internet via the device.

Re-Enter Password

Confirms the password with the re-entered password.

Trusted User

Defines the selected user as a trusted user when enabled is

checked. The user is limited to timing and content when

visiting the Internet, as defined in the following fields.

Content Rule

Selects from the pop-up menu an existing content rule that

defines what kind of Websites the user can visit or not.

White List Access Only

Selects the White List Access option. If you have created a

content rule that defines a black list and white list, select the

White List Access Only checkbox to force the wireless modem

to execute the policy for the selected user.

Ubee Interactive

Ubee DDW365 Advanced Wireless Gateway Subscriber User Guide

•

September 2015

61

8.2

Using the Basic Option

The

Basic

option allows you to select rules to block certain Internet content and Web

sites. After you change your Access Control settings, click the appropriate Apply, Add, or

Remove button for your new settings to take effect. Refresh your browser’s display to see

the currently active settings.

Steps

To filter Internet content and Web sites:

1.

Click the

Access Control

link from the top of the screen.

2. Click

Basic

from the left side of the screen. The

Basic

fields are explained following

this screen example.

Time Access Rule

Selects a defined time access rule to apply to the selected

user.

Session Duration

Allows you to enter a time in minutes for the user’s session to

expire. When the session expires, the user can log in again for

the same session duration.

Inactivity Time

Allows you to enter the time out value when a user has no

activity on the Internet. When the time expires, the user

interface to the Internet is canceled.

Apply

Saves all changes when clicked.

Trusted Computers

Defines the trusted hosts that can bypass the Access Control

Process.

Add

Adds the trusted host’s MAC address entered in the given

area and Add is clicked.

Remove

Removes a trusted computer from the list when it is

highlighted and Remove is clicked.

Label

Description