Page 56 / 112
Scroll up to view Page 51 - 55
User Manual
EchoLife HG520 Home Gateway
Chapter 5
Advanced Setup
Huawei Technologies Proprietary
45
Figure 5-11
Advanced Setup – Firewall – Parental Control
1)
The MAC Address of the “Browser” automatically displays
the MAC address of the LAN device, click the <Other MAC
Address> button and enter the MAC address of the other
LAN device.
2)
To find out the MAC address of a Windows-based computer,
go to command window and type “ipconfig/all”.
3)
Click <Save/Apply> to save and activate the restriction rule.
Page 57 / 112
User Manual
EchoLife HG520 Home Gateway
Chapter 5
Advanced Setup
Huawei Technologies Proprietary
46
Figure 5-12
Advanced Setup – Firewall – Add new Parental
Control
5.5
Configuring Quality of Service
Quality of Service (QoS) (including IP Precedence, IP TOS and
IEEE 802.1P) refers to a combination of mechanisms that jointly
provide a specific quality level to application traffic crossing a network
or multiple, disparate networks.
Page 58 / 112
User Manual
EchoLife HG520 Home Gateway
Chapter 5
Advanced Setup
Huawei Technologies Proprietary
47
Figure 5-13
Advanced Setup – Quality of Service
1)
Click on <Add> to create a class to identify the IP traffic by
specifying at least one condition below.
Page 59 / 112
User Manual
EchoLife HG520 Home Gateway
Chapter 5
Advanced Setup
Huawei Technologies Proprietary
48
Figure 5-14
Advanced Setup – Add new QoS rule
2)
If multiple conditions are specified, all of them take effect.
3)
Click <Save/Apply> button to save it.
5.6
Configuring Routing
There are three routing information related settings.
Page 60 / 112
User Manual
EchoLife HG520 Home Gateway
Chapter 5
Advanced Setup
Huawei Technologies Proprietary
49
5.6.1
Default Gateway Configuration
Figure 5-15
Advanced Setup – Routing – Default Gateway
1)
If “Enable Automatic Assigned Default Gateway” checkbox
is selected, HG520 will accept the first received default
gateway assignment from one of the PPPoA, PPPoE or
MER/DHCP enabled PVC(s).
2)
If the checkbox is not selected, enter the static default
gateway AND/OR a WAN interface.
3)
Click <Apply> button to save it.