1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. Touch P5
    5. /
  5. 20
Page 96 / 103 Scroll up to view Page 91 - 95
Chapter 4
Configure Touch P5 as an Access Point
91
3.
Tap
Save
.
Note:
1.
If you disable this function, your touchscreen will under no protection and anyone can change the settings of
your Touch P5. But logging into the web management page still requires the password.
2.
If you change the administrator password on the screen, logging into the web management page also requires
the new password.
4. 13.
About
The About app displays the product model and hardware and firmware information of
your Touch P5.
On the menu screen, tap the
About
icon to start it.
4. 14.
FAQ
Q1. What can I do if I cannot access the Internet?
1.
Check if the Internet is working properly by connecting a computer directly to the
wired router via an Ethernet cable. If not, contact your Internet Service Provider.
2.
Tap
Quick Setup
on the menu screen to run the setup again.
3.
Tap
Reboot & Reset
on the menu screen, select
Reboot
to reboot your Touch P5 and
try again.
Q2. What can I do if I forgot my wireless network password?
Tap
Wireless Settings
on the menu screen to obtain the security password, both for
2.4GHz and 5GHz wireless networks.
Q3. How do I restore my Touch P5 to its factory default settings?
1.
Tap
Reboot & Reset
on the menu screen, and then tap
Reset
.
Page 97 / 103
Chapter 4
Configure Touch P5 as an Access Point
92
2.
With your Touch P5 powered on, press and hold the
Reset
button on the back panel
until the Touch P5 logo displays.
Note:
Once your Touch P5 is reset, all the settings will be lost and you will need to re-configure your Touch P5.
Q4. What can I do if I forgot my administrator password?
With your Touch P5 powered on, press and hold the
Reset
button on the back panel
until the Touch P5 logo displays to restore your Touch P5 to its factory default settings,
and create a new administrator password.
Q5. What can I do if I forgot my account for web management page?
1.
The default username and password of the web management page are
admin
(in
lower case).
2.
The web management page and touchscreen share the same password. Please try
the administrator password of the touchscreen.
3.
Restore your Touch P5 to its factory default settings: with your Touch P5 powered
on, press and hold the
Reset
button on the back panel until the Touch P5 logo
displays.
Note:
Once your Touch P5 is reset, all the settings will be lost and you will need to re-configure your Touch P5.
Page 98 / 103
1
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice.
is a registered trademark
of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks
or registered trademarks of their respective holders.
No part of the specifications may be reproduced in any form or by any means or
used to make any derivative such as translation, transformation, or adaptation
without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2016 TP-LINK
TECHNOLOGIES CO., LTD. All rights reserved.
Page 99 / 103
2
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1.
This device may not cause harmful interference.
2.
This device must accept any interference received, including interference that may
cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the
user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be co-located or
operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to
only Mobile Configurations. The antennas used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not be co-
located or operating in conjunction with any other antenna or transmitter.”
This device is restricted in indoor environment only.
Page 100 / 103
3
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio
interference, in which case the user may be required to take adequate measures.
RF Exposure Information
This device meets the EU requirements (1999/5/EC Article 3.1a) on the limitation of
exposure of the general public to electromagnetic fields by way of health protection.
The device complies with RF specifications when the device used at 20 cm from your
body.
National Restrictions
Restricted to indoor use.
Canadian Compliance Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation
is subject to the following two conditions:
1.
This device may not cause interference, and
2.
This device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1.
l’appareil ne doit pas produire de brouillage;
2.
l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme
si le brouillage est susceptible d’en compromettre le fonctionnement.
This radio transmitter (IC: 8853A-Touch P5/ Model: Touch P5) has been approved by
Industry Canada to operate with the antenna types listed below with the maximum
permissible gain indicated. Antenna types not included in this list below, having a gain
greater than the maximum gain indicated for that type, are strictly prohibited for use
with this device.
Le présent émetteur radio (IC: 8853A-Touch P5/ Model: Touch P5) a été approuvé par
Industrie Canada pour fonctionner avec les types d’antenne énumérés ci-dessous et
ayant un gain admissible maximal. Les types d’antenne non inclus dans cette liste
ci-dessous et dont le gain est supérieur au gain maximal indiqué, sont strictement
interdits pour l’exploitation de l’émetteur.
Antenna
3 Dual Band Detachable Antennas, 2dBi for both 5GHz and 2.4GHz

Rate

3.5 / 5 based on 2 votes.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top