Page 106 / 113
Scroll up to view Page 101 - 105
TL-WR941ND
Wireless N Router
field of the Web browser.
3)
Log in to the Router, click the “
Forwarding
” menu on the left of your browser, and click
the "
Virtual Servers
" submenu. On the "
Virtual Servers
" page, click
Add New…
, then
on the “
Add or Modify a Virtual Server
” page, enter “80” into the blank next to the
“
Service Port
”, and your IP address next to the “
IP Address
for an example, remember to
Enable
and
Save
.
Figure A-9
Virtual Servers
Figure A-10
Add or Modify a Virtual server Entry
5.
The wireless stations cannot connect to the Router.
1)
Make sure the "
Wireless Router Radio
" is enabled.
2)
Make sure that the wireless stations' SSID accord with the Router's SSID.
3)
Make sure the wireless stations have right KEY for encryption when the Router is
encrypted.
4)
If the wireless connection is ready, but you can’t access the Router, check the IP Address
of your wireless stations.
-97-
Page 107 / 113
TL-WR941ND
Wireless N Router
Appendix B: Configuring the PCs
In this section, we’ll introduce how to install and configure the TCP/IP correctly in Windows XP.
First make sure your Ethernet Adapter is working, refer to the adapter’s manual if needed.
1.
Install TCP/IP component
1)
On the Windows taskbar, click the
Start
button, point to
Settings
, and then click
Control
Panel
.
2)
Click the
Network and Internet Connections
icon, and then click on the
Network
Connections
tab in the appearing window.
3)
Right click the icon that showed below, select Properties on the prompt page.
Figure B-1
4)
In the prompt page that showed below, double click on the
Internet Protocol (TCP/IP)
.
-98-
Page 108 / 113
TL-WR941ND
Wireless N Router
Figure B-2
5)
The following
TCP/IP Properties
window will display and the
IP Address
tab is open on
this window by default.
Now you have two ways to configure the
TCP/IP
protocol below:
¾
Setting IP address automatically
Select
Obtain an IP address automatically
, Choose
Obtain DNS server automatically
, as
shown in the Figure below:
-99-
Page 109 / 113
TL-WR941ND
Wireless N Router
Figure B-3
¾
Setting IP address manually
1
Select
Use the following IP address
radio button. And the following items available
2
If the Router's LAN IP address is
192.168.0.1, specify the IP address as 192.168.0.x (x is
from 2 to 254), and
Subnet mask
is 255.255.255.0.
3
Type the Router’s LAN IP address (the default IP is
192.168.0.1) into the
Default gateway
field.
4
Select
Use the following DNS server addresses
radio button. In the
Preferred
DNS
Server
field you can type the DNS server IP address, which has been provided by your ISP
-100-
19216811.live